Nikon DCX3200 manual Troubleshooting

7 TROUBLESHOOTING

Problem	Possible Solution
There is no	Verify that the mute button on the DCX set-top or
audio when	the remote control has not been pressed. Press
viewing cable	mute on the remote control to restore sound.
channels	•	If the DCX set-top audio output is
		connected to the TV, verify that the
		mute button on the TV has not been
		pressed.
	•	If the DCX set-top audio output is
		connected to a home theater receiver,
		verify that the receiver is set to the
		appropriate input source and the mute
		button on the receiver has not been
		pressed.
	•	Verify that you have the correct cables
		for the audio connections.
	•	Verify that the audio cables are firmly
		connected between the DCX set-top
		and the audio playback device (TV,
		receiver, DVD player, etc.).
There is no	Not all programs feature full Dolby Digital® [5.1] or
audio from the	Dolby Digital® Plus [7.1] full surround sound. In
center and/or	some cases, the programs may only contain left
surround	and right stereo audio.
speakers of a	•	Verify that the S/PDIF (coaxial or
home theater
		optical) audio cable is firmly connected
receiver
		to the DCX set-top and the home
connected to
		theater receiver.
the DCX set-
top	•	Verify that the home theater receiver is
		set to a surround sound audio mode
		(Dolby Pro Logic ®, Dolby Pro Logic II®,
		Dolby Pro Logic IIx®).
	•	Verify that the receiver is properly
		configured to work with all connected
		speakers.

42