Nikon DX-TL5716E user manual About the hard disk drive HDD

Page 4

Caution and care (continued)

Warning

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Note: This symbol mark is for EU countries only.

This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused.

This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.

If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:

Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)

In the European Union there are separate collection systems for used electrical and electronic products, batteries and accumulators.

Please, dispose of this equipment, batteries and accumulators correctly at your local community waste collection/ recycling centre.

Please, help us to conserve the environment we live in!

About the hard disk drive (HDD)

This unit is equipped with HDD, which is a very delicate device. Therefore, handle this unit carefully.

Don't expose this unit to vibrations and shocks. It may be damaged when exposed to vibrations and shocks especially during power-on or access to the HDD.

Don't unplug the power cord during recording/playback or power-on.

This unit is equipped with a system that automatically resumes and continues recording in the event of a minor failure in the HDD or other components during recording. However, depending on the type of a failure in the HDD, this unit may not able to continue recording. For early detection of failures, it is recommended to have this unit inspected every year.

In the event of a fault in the HDD, replace it immediately. For replacement of the HDD, please contact your Mitsubishi dealer. (To replace the HDD, it is required to stop recording.)

Use recommended HDD only. For HDD supported by this unit, please contact your Mitsubishi dealer.

When the HDD is replaced, the recorded data are deleted. To ensure stable operation of this unit, the firmware may be updated from time to time. The recorded data may be deleted in such a case.

When you dispose of or transfer this unit, handle the video data stored in HDD carefully and take all responsibilities related to the disposal or transfer.

In the event of a failure in the HDD during normal recording or mirroring, this unit may not be able to resume recording after rebooted, depending on the failure condition.

When you enable the mirroring function while the recorded data are stored in the HDD, the recorded data are deleted.

When you delete the data, the recorded images cannot be played back any more.

It is recommended to check regularly that the recorded data are played back correctly.

4

Image 4
Contents DX-TL5716E Before use / Contents English About the hard disk drive HDD Installation location and handling Precautions for rack-mountingChanging installation location MaintenanceFor important recordings About DVD/CD discsMaintenance of DVD drive laser pickup Recording time and product warrantySupplied power cord CopyrightNetwork DisclaimerOpen source software MPEG-4 patentSoftware License Agreement Adjusting the built-in clock Playing back recorded images Press the Play button on the front panelPress the Pause button to pause playback Still image playbackChanging the screen mode to display images from cameras Press the 4-split buttonChanging the screen mode using the mouse single screen mode Changing the screen mode using the mouse split screen modeSearching for the desired image Press Button to start playbackSpecifying the search time using the calendar Displaying Search menu using the mouse4 5 6 7 8 Copying recorded images Displaying Copy menu using the mouse BackupCopying images registered in the alarm list Copying data by specifying the copy rangeSLD Security & Communications