Microtek MHP1-HD user manual Adjusting the Volume, Adding/Deleting Channels, Changing Channels

• Adding/Deleting Channels

You can add or delete individual channels using the on-screen menus, so that the menus do or do not appear when you move through channels using CH or CH .

To add or delete channels:

1.Select the channel you want to add or remove.

2.Press the MENU button on the remote control or on the PDP unit.

3.Press the UP/DOWN (/) button on the remote control to select “TV”, then ENTER to confirm your selection.

4.Press the UP/DOWN (/) button to select “Edit”, then LEFT/RIGHT (/) to select “Add” to add the selected channel or “Del” to remove the selected channel.

• Changing Channels

To change channels, use one of the following methods:

–Press the CH or CH button on the remote control or on the PDP unit to see the channel that the PDP has memorized.

–To enter a channel number 1-99, use the number buttons on the remote control. To enter a channel number over 100, first press the 100 button and then the last two digits of the channel number.

For example, to enter the channel number 121, first press the 100 button, then 2, then 1.

• Channel Return

The PDP has a channel return feature which allows you to conveniently return to the previous channel viewed, even when you don’t remember the channel number.

To return to the previous channel, press the BACK button on the remote control.

Adjusting the Volume

To adjust the volume, press the VOL+ or VOL– button on the remote control or on the PDP unit to raise or lower the volume.

You can also adjust the volume using the on-screen menu. See the section, “Adjusting the Sound” in Chapter 5: Using the PDP’s Features.

AIR

STD

ENTER

ADD

OFF

28