Hyundai IT HY-DVDR instruction manual Basic Connection, Connecting to TV set, Channel

BASIC CONNECTION

uEnsure that the power switch of this unit and other equipment to be connected is turned off before commenc- ing connection

uRead through the instructions before connecting other

equipment

uEnsure that you observe the color-coding when con- necting audio and video cords

A: Connecting to TV set

1.TV set (not included)

2.DVR Record player

3.To S-video input connector of TV set (not included)

4.75ohm Antenna input jack (antenna cable not included)

5.Video/Audio cord

6.To composite video input connector of TV set (yellow)

7.To TV Set audio input left and right connector.(white, red)

To get the best possible image quality, please use the S- video cord. Connect the unit to the TV set with S-video input, and set the TV set to S-video input. Meanwhile set the OSD menu’s video output to S-video. Then the image will be clearer.

Recommendation: Set the analogue audio output as

2 CHANNEL

B:Connection with External Antenna/CATV signal Source and TV set

1.Audio/Video equipment (not included)

2.TV SET (not included)

3.DVR Record player

4.75ohm Antenna input jack (Antenna cable not supplied)

5.Video/Audio cord.

6.To TV set video input connector(yellow).

7.To TV set audio input connector (white,red).

8.S-video. to TV set S-video input connector .

9.Video/Audio cord .

10.to Audio/Videot equipment video output connector.

11.to Audio/Videot equipment audio output connector

(white,red)

Recommendation: Set the analogue audio output up

2 CHANNEL

-9-

DVR-˵Ã÷Êé.p65 9 03-9-16, 15:18