Menu Operations
Function Menu Options
1.Press MENU button and CH+/CH- until the following menu appears on the screen.
|
| Video | Language | English | ||
|
|
|
| |||
|
|
|
|
| OSD Timeout | Short |
|
|
|
|
| ||
|
| Audio | OSD Transparency | Middle | ||
|
|
|
|
| Screen Mode | Full screen |
|
|
|
|
| ||
|
| Channel | ||||
|
| Blue Screen | On | |||
|
|
|
|
| DPMS | On |
|
|
|
|
| ||
|
| Function |
| |||
|
|
| Time Setup |
| ||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
| Lock | Closed Caption |
| ||
|
|
| ||||
|
|
|
|
| Default |
|
|
|
|
|
|
| |
Function
CH+/- VOL+/-
Select EXIT Back
2.Press VOL+/OK button to enter the Function menu and CH+/CH- to go up and down to select the desired option .
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Language: Press VOL+/VOL- button to select language of the OSD.
OSD Timeout: Press VOL+/VOL- to select Middle, Short and Long to change the time of the OSD display.
OSD Transparency: Press VOL+/VOL- to select among Low, High and Middle to change the transparency of the OSD. To select Low, the OSD is opacity.
Screen Mode: Press VOL+/VOL- to select among Full Screen, Normal, Wide, Zoom and Cinema to change the display mode. ( display mode may differ from different inputs)
Blue Screen: Press VOL+/VOL- to select On , the screen will be in blue after 3 seconds if there is no signal.
DPMS: PC Power Management. To set On, the set will be in standby mode automatically if no signal in 2 minutes; if signal input , the set will be on again automatically.
Time Setup: Press VOL+/OK to enter the submenu.
Time Zone: Press VOL+/VOL- to select the appropriate time zone.