Q-See QS206 PAN-TILT-ZOOM Cameras PTZ, Restoring Factory Settings, Restarting the DVR SOFT-RESET

Page 25

RESTORING FACTORY SETTINGS

STEP 1. Click DEFAULT SETTINGS. This will restore the system to the original factory settings.

STEP 2. Click OK in the prompt.

IMPORTANT! Restoring factory settings will cause any settings you’ve made to the system to be removed! This includes recording and network setups along with passwords!

RESTARTING THE DVR (SOFT-RESET)

STEP 1. Click RESTART.

STEP 2. Click OK in the prompt. The system will perform a soft-reset and load to a live split-screen view.

UPGRADING THE FIRMWARE

STEP 1. Copy the firmware file to an empty USB flash drive. The firmware file should not be in a folder.

STEP 2. Connect the USB flash drive to the top USB port on the front panel of your system.

STEP 3. Open the System Menu.

 

STEP 4. Click FIRMWARE UPDATE.

PICTURE 6-7

The system will scan the USB

 

flash drive and begin updating the

 

firmware. Do not remove the USB

 

flash drive while the upgrade is

 

taking place.

 

STEP 5. Click CLOSE in the confirmation

 

window. In the system prompt, click

 

OK. The system will restart.

 

6.5 PAN-TILT-ZOOM CAMERAS (PTZ)

Use the PTZ Setup menu to configure settings for an optional PTZ camera.

NOTE! Consult the instruction manual of your PTZ camera for complete information about your camera, including protocol and baud rate.

The menu will only display four channels at a time. The pull-down menu in the upper left of the menu allows you to switch between groups of four channels; 1-4, 5-8, 9-12 and 13-16 - the number of channels being dependent on how many your DVR supports.

The PTZ setting options for each camera can be selected independently and are available below each camera’s channel number.

CHAPTER 6 ADVANCED FEATURES

PICTURE 6-8

Configuring a PTZ camera:

STEP 1. Connect a PTZ camera to the BNC and 485A (TX, +) and 485B (RX, -) ports and power outlet.

STEP 2. PROTOCOL Select PELCO-D or PELCO-P for the selected channel. STEP 3. BAUD RATE Select 1200, 2400, 4800, or 9600.

STEP 4. DATA BIT Select 5, 6, 7, or 8.

STEP 5. STOP BIT Select 1 or 2.

STEP 6. VERIFY Select ODD, EVEN, MARK, SPACE, or NONE.

STEP 7. ADDRESS Enter an address from 001~255 using the Virtual Keyboard. Refer to your PTZ camera`s instruction manual for further details.

STEP 8. Click APPLY and then click CLOSE in the confirmation window. STEP 9. Click EXIT in all menus until all windows are closed.

48

49

Image 25
Contents Model QS434 About this Manual Table of Contents Introduction Features and Specifications Power InstallationConnection USB PortsFront Panel Item # Connector DescriptionRear Panel Item #Front Panel Rear Panel QS408QS434 During Playback Press Item # Name/ Symbol DescriptionControls ControlsMouse Control Virtual KeyboardName/Symbol Function Remote ControlSystem Login Power ON/OFFBasic Operation Shortcut MenuSymbol Name Function Basic SettingsBasic Operation Main MenuAdmin and User passwords must not be the same PasswordOperation DATE/TIMEVIDEO/AUDIO DisplayBOTTOMLEFT, Topright PreviewPlayback Hard Drive HDD ManagementVideo Search Formatting the Internal Hard DriveFile List Using the ON-SCREEN Playback ControlsTo narrow search results NavigationUsing the Playback Software BackupAudio Settings Video Play SettingsRecording Recording ConfigurationRecording Recording ScheduleMask Field Motion Detection SettingsMotion Detect Alarm Advanced FeaturesAlarm Settings Advanced Features Restarting the DVR SOFT-RESET Restoring Factory SettingsConfiguring a PTZ camera PAN-TILT-ZOOM Cameras PTZProduct Specifications Hard Drive InstallationAppendix QS206 QS408 QS434 QS464Frequently Asked Questions Question 11 Why is Motion detection not working? Liability Exclusions See Product WarrantyQuestions or COMMENTS? Contact US
Related manuals
Manual 3 pages 31.39 Kb Manual 7 pages 59.33 Kb

QS408, QS464, QS434, QS206 specifications

Q-See is a well-known brand in the security camera industry, offering a variety of surveillance systems that cater to different needs. Among their range, the QS408, QS206, QS464, and QS434 models stand out due to their advanced features, smart technology, and user-friendly design.

The Q-See QS408 is an 8-channel security camera system designed for comprehensive surveillance. It supports up to 4MP resolution, allowing users to capture crystal-clear images, ideal for monitoring large areas. One of its standout features is the remote viewing capability, which enables users to access live feeds and recorded footage from their smartphones or tablets. The system also includes motion detection alerts, which notify the user immediately when unusual activity is detected.

Next is the Q-See QS206, which is a more compact solution that provides 2 channels. This model targets users seeking efficient surveillance without the complexity of larger systems. It also offers 1080p HD resolution, ensuring video clarity for essential areas. Like the QS408, the QS206 supports remote access through mobile devices and has enhanced night vision capabilities, which provides clear images even in low light conditions.

The Q-See QS464 takes surveillance a step further with its 16-channel capabilities, perfect for larger premises. Supporting up to 5MP resolution, it features advanced H.265 video compression technology, which helps to save storage space without compromising video quality. This model also boasts an IR range for night vision, ensuring visibility up to 100 feet in total darkness. Additionally, its user-friendly interface allows for easy customization of settings.

Finally, the Q-See QS434 model is the perfect balance between functionality and affordability, offering 4 channels. It delivers 1080p video quality and is equipped with weather-resistant cameras, ensuring reliable outdoor performance. Motion detection, remote viewing, and a customizable recording schedule are key features that enhance its usability.

All four models utilize the latest in surveillance technology, like their weather-resistant designs, ensuring long-term performance regardless of environmental conditions. With a focus on ease of use, these models are equipped with intuitive software systems that allow for quick setup and seamless operation. Whether for residential or business use, Q-See's QS series provides a reliable and efficient method for enhancing security.