INFORMATION
Connecting to Power
Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a 10A plug complying with BS1363. If this plug is unsuitable or needs to be replaced, please note the following :
Plug Replacement
If you need to replace the fitted plug.
WARNING :
Never connect live or neutral wires to the earth terminal of the plug. Only fit an approved 13 Amp BS1363/A plug and the correct rated fuse. If in doubt, consult a qualified electrician.
IMPORTANT
This unit is a Class 1 Appliance and must be fitted with an Earthed Plug fitted with a 13A fuse.
The wires in this mains lead are coloured as follows: Yellow &
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
YELLOW & GREEN (EARTH)
BLUECABLE
(NEUTRAL) GRIP
BROWN (LIVE)
The wire which is Coloured Yellow & Green must be connected to the terminal which is marked E or the earth symbol (
). The wire which is coloured blue must be connected to the terminal which is marked with N or coloured blue. The wire which is coloured brown must be connected to the terminal which is marked L or coloured brown. Always ensure that the plug cord grip is fastened correctly. If a 13A (BS1363) fused plug is used it must be fitted with a 3A fuse conforming to BS1362 and be ASTA approved. If in doubt contact a qualified electrician.
CE
marking
The shipped version of this device compies with the requirements of EEC directives 2004/108/CE "Eletromagnebc compabblity and 2006/95/EC "Low votage directive"
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
32 | ALBA HD Ready LCD TV Instruction Manual Helpline: 0845 604 0105 |