Installing the mounts
Step 3
Select the area where the plasma will be installed and make sure it can support the weight standards (see warning on page 3). Locate the 16" wood stud centers behind the wall using a (commercially available) stud finder and mark the center of the studs when found. Set the mounting bracket to the wall and mark the desired height by marking the center of the
tilt back plate. See fig 3
Desired height
marking
Wall structure
Tilt back plate
16"
Stud centers marking
Adjusting the mount
Wood studs behind
the wall structure
CENTER
OF
VIEWING
HEIGHT
floor | floor |
- 7 -