VIZIO® VW46L FHDTV20A User Manual
2.7 Connecting an external Receiver/Amp
1.Turn off the power to the LCD HDTV and Receiver/Amp.
2.Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white area) audio connectors at the rear of
the LCD HDTV.
3.Turn on the power to the LCD HDTV and Receiver/Amp.
4.Then press the MENU button on the remote control to open the
5.Press the on the remote control to
select the Audio menu.
6.Press the 
on the remote control to select SPEAKERS.
7.Press then
on the remote control to select OFF so that the sound from the
LCD HDTV will now be routed through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed.
Note:
a)Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)The audio output is not amplified and cannot be connected directly to external speakers.
2.7.1Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL AUDIO OUT (white area) at the rear of the LCD HDTV. This is active when receiving audio with the program being viewed no matter what input is being used.
Version 10/20/2008 | 24 |
| www.VIZIO.com |