Wintal PDVDX100B, DVD/DVB-T Combo Player, PDVDX100S manual Operation

OPERATION

DVD PLAYER OPERATION PART

￿The option of display language catalog is pre- set to English. Please refer to Setup operation

￿Most of functions are operated by remote control. Either operation of remote control and front panel is effected when their buttons indi- cate the same function

Preparation

￿Turn the TV on and select AV as the TV input

￿Switch on the stereo system power if the player has been connected to stereo system. Note: some of buttons will have double function. Please refer to DVB PART for those buttons with DVB operation function.

STANDBY

When you press the buttons, the player will switch to Standby status. When pressed again, the player is returned to normal working status.

Note: should you not wish to use the player, please switch off the power by pressing the power button

DVD player playback operation

This unit default status is DVB status. Please kindly push DVD/DVB button to switch into the DVD status.

PLAY

1.Push power button on the unit, and it displays LOAD on the VFD which indicates normal power supply.

(Note: The disc information appears after sev- eral seconds if there is a disc after LOAD dis- played otherwise appears NO DISC)

2.Press OPEN/CLOSE button to open disc tray. OPEN will be indicated on the left upper of TV screen.

3.Place a disc (8cm or 12cm) into the tray. (For one- sided disc, position it with printed title side facing up. For two-sided disc, position side to be playback facing down)

4.Press OPEN/CLOSE again to close disc tray CLOSE will display on the left upper of TV screen, then shows “Reading” and “Loading” will display on the VFD screen.

5.Press PLAY to playback disc. You may oper- ate according to MENU indication after MENU shows on the screen then press OK button to playback. Some discs can play automatically after loaded.

STOP

Press STOP button to stop playing. When play- back is stopped, the unit records the point where STOP was pressed (RESUME function). Press

PLAY again, and play will resume from this point. Press STOP button twice, RESUME function will be cancelled. RESUME function is suitable for discs showing playing time during playback.

DivX discs have no such function.

SKIP-/SKIP+

Press SKIP-/SKIP+button on remote control dur- ing playback. A chapter (DVD) or a track (CD) is skipped back or ahead correspondingly each time the button is pressed.

Note: SKIP-/+ buttons works as Page down/up in MP3/DivX/JPEG CD playing menus.

F.FWD/F.RWD

Press F.FWD/F.RWD button on the remote control during playback and the unit will enter fast forward/reverse status. There are 4 speeds of fast forward (reverse) available: x2, x4, x8, x20. To return to normal play, press PLAY button on player or remote control again.

Note:

1.Some discs have no such function.

2.For DIVX discs, if the played file is too small, the speed levels of fast forward (reverse) will only have x2 or x4.

SLOW

Press SLOW button on the remote control during playback and the unit will enter slow forward/ reverse status. There are 4 speeds available: 1/ 2, 1/4, 1/6, 1/7. To return to normal play, press PLAY button on player or remote control again. Note: Some discs have no such function

PAUSE/STEP

Press PAUSE/STEP button during playback, the player will enter pause mode. If the button is pressed again, the disc is advanced by one frame (step). When the button is kept pressed, con- secutive frame advance works. To return to nor- mal play, press PLAY button.

Note: Some discs have no such function.

NOTE: During the playing of the introduction of a movie, PAUSE/STEP, F.FWD, F.RWD, SLOW, SKIP- / SKIP+ may be ineffective.

NUMBER (0-9, 0/10 button)

Press Number (0-9, 0/10) button and press OK button allows you to directly access any desired track while a disc is playing.

Note: Some discs have no such function.

MUTE

Press MUTE button during playback, the player shows mute picture and there is no audio output

-14-

PDVDX100S-100B-im.p65 14 06-5-16, 11:31