Whirlpool 1180435-A Caring for the Remote Control, Replacing the batteries

Page 16

Caring for the Remote

Control

Proper maintenance of your remote control ensures longer life. This section tells you how to perform general maintenance for your remote control.

Cleaning the remote control

Wipe clean with a soft, dry cloth.

NOTE: DO NOT immerse the remote control in water. Doing so could damage the batteries and the internal electronics of the remote control.

Replacing the batteries

Under normal use and operating conditions, you should replace the batteries in the remote control once a year. However, if the air conditioner stops responding to the remote control, the batteries could be low and need to be changed.

BATTERIES: (2) AAA Alkaline

IMPORTANT: Every time you replace the batteries or cut the power to the remote control, your SETTING Buttons lose their program and the time of day setting. You will have to reprogram the SETTING Buttons and the time of day.

16

I

Image 16
Contents Owher’s InstructionsPage Whirlpool Corporation Important Safety Instructions Parts and FeaturesUsing the Remote Control To adjust the time of dayTo Adjust the Time of DAY Press Display ShowsCycle options Adjust FAN Speed Adjust TemperatureTo Activate Sleep Cycle Press Activating a set cycle To Activate CycleChanging Cycle~ I -- .-. .~ ’ to Change0aAb 04AD To Activate Cool Cycle PressTo Activate Option Press To Activate FAN only Cycle PressLOW -+ MED + High -- LOW To Activate DRY Cycle Press LOW -- MED + High + LOWTo SET Delay Start Press Delay StartStart Time To SET Delay Stop Stop TimeTo Clear Setting To Check What Is SetMode Caring for the Remote Control Replacing the batteriesTroubleshooting Obtaining ServiceProblem Possible Solution