Acer G24 manual Installation, EN-13

Page 14

G24

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.1-1 Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

1-2 Digital Cable (Only Dual-Input Model)

a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.

1-3 HDMI Cable (Only HDMI-Input Model)

a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer.

2.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

EN-13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Table of Contents Special Notes on LCD Monitors EN-1Information for your safety and comfort EN-2Product servicing EN-3Taking care of your vision EN-4Unpacking EN-5ATTACHING/REMOVING the Base EN-6Screen Position Adjustment EN-7Cleaning Your Monitor Connecting the Power CordSafety Precaution EN-8EN-9 DDCLED EN-10 Connector PIN AssignmentPIN no Description PIN EN-11Standard Timing Table EN-12Installation EN-13EN-14 User ControlsMenu / Enter HOW to Adjust a Setting EN-15EN-16 ∙ Adjusting the PictureUser EN-17 EN-18 DDC/CIEN-19 LED OFF TroubleshootingLED on EN-20EN-21 EN-22 Declaration of Conformity EN-23Federal Communications Commission Declaration of Conformity EN-24
Top Page Image Contents