Acer AT2621, AT2622, AT4221, AT4222, AT3221, AT3222 Re-scan for channels, Scanning for channels

Re-scan for channels

The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please follow the steps below:

Scanning for channels

1	Press the MENU key on the remote control to bring up the OSD.
2	Use the directional keys to navigate and select	Channel Management.

Highlight Auto Scan. Then, select Start and press OK to begin.

3 or

Highlight Manual Scan. Then, select Scan up, Scan down or Scan for updates and press OK to begin.

4 Select OK and press MENU to exit.

English

13