Compliance, Specifications, System Requirements

Compliance

•Compliance with Gen1i, and Gen1m of Serial ATA II Electrical Specification 1.0

•Compliance with USB 2.0 (Hi-Speed) electrical specification

•Compliance with USB Mass Storage Class Bulk-Only Transport Specification

•Compliance with Gen1i of Serial ATA II Electrical Specification 1.0

•Support SATA Spread-Spectrum Clock

•Support SATA II Asynchronous Signal Recovery (Hot Plug) feature

•Compliance with USB 2.0 electrical specification

•Support USB High-Speed and Full-Speed Operation

•Compliance with USB Mass Storage Class, Bulk-Only Transport Specification

•Support ATA/ATAPI PACKET command set

•Support ATA/ATAPI LBA48 addressing mode

•Support 12MHz external crystal

•Support external NVRAM for Vender Specific VID/PID, Manufacture, Product String of USB Device Controller

•Support SCSI-2 Vender Specific Command for GPIO access

•Support SCSI-2 Vender Specific Command for NVRAM access

•Support SCSI-2 Vender Specific Command for ATA PIO command access

•Support ATA/ATAPI device power down control in USB Suspend mode Embedded 3.3V to 1.8V voltage regulator

•Single power 3.3V power supply

•0.18um CMOS technology

•64 LQFP package

Microsoft Windows 98

Microsoft Windows ME, 2000, XP, 2003, Media Center, and later

Mac OS 9.22 and above