SpectronIQ PD-3000HD user manual Troubleshooting, Symptom Possible Cause Resolution

OMPD3000HD.book Page 24 Tuesday, September 5, 2006 9:08 PM

Troubleshooting

Symptom	Possible Cause	Resolution
Power does not	Power cord not	Make sure the power cable is firmly inserted into the
come on	securely connected	wall outlet.
	Power outlet is off or	Try plugging a different device into the outlet and
	not working	see if it turns on. If not, check that the outlet is on or
		use a different outlet.
	Player main power is	Ensure the power button on the player itself is on.
	off
No picture	Player is off	Press the power button on the player to turn the
		player on. Then, if needed, press the power button
		on the remote.
	No signal	Make sure the proper source is selected on the
		external display. If there is still no picture, check the
		signal cable(s) and ensure the player is on and
		working.
Display is too dark	Contrast or	Adjust the contrast and/or brightness to desired
or too bright	brightness too low	setting on the display.
	or too high
Distorted image	Display format set	Check that the correct display format is selected in
	incorrectly	the Setup menu (see “Video” on page 21).
Unclear or noisy	Signal cable(s) not	Make sure the signal cable(s) are firmly connected.
picture	securely connected
	Radio interference	Check for any electronic devices nearby that might
		be interfering with the video signal or the player’s
		operation.
No sound	Audio cable(s) not	Make sure the audio signal cable(s) are firmly
	securely connected	connected.
	Audio muted	Unmute the audio by pressing the MUTE button on
		the remote.
	Audio settings set	Check the audio settings in the Setup menu (see
	incorrectly	“Audio” on page 22).
Distorted sound	Audio settings set	Check the audio settings in the Setup menu (see
	incorrectly	“Audio” on page 22).
	Audio cable(s) not	Make sure the audio signal cable(s) are firmly
	securely connected	connected.

24