DOWN button
Power button
Power LED
Turning the TV On and Off
1 Press the POWER button on the remote control (or control panel). The power LED on the front of the TV changes from red to green, indicating that the power has been turned
on.
2 Press the POWER button again; in AV mode, the power
LED changes from green to
red, indicating that the TV is in (off) mode. When signal is not detected in PC mode, the power LED turns amber, indicating that the PC is in standby mode.
Selecting Channels
Press the CH UP button or CH on the control
panel to select the channel or enter the specific channel num- ber by pressing the number but- tons on the remote control.
ON/OFF | MUTE | SOURCE MENU |
Channel down
Channel up
< CH >
< VOL >
29