Insignia NS-DXA1-APT manual Troubleshooting, Specifications, Legal notices

Converter Box with Analog Pass Through

Troubleshooting

Insignia has detailed information about troubleshooting problems on its Web site at:

www.insignia-products.com/t-frequently_asked_questions.aspx

Problem	Solution
No power.	• Make sure that the power cord is
		plugged securely into a power outlet.
Fragmented picture	• Check your antenna input, location,
and unclear sound.		and signal strength.
No picture.	• Select the Auto Tuning or Manual
		Scan functions, if you have not
		already done so.
	• Make sure that all the cables are
		installed correctly and that the
		correct source is selected on your TV
		(for example, CH 3, CH 4, Video 1, or
		Video 2).
	• The antenna signal strength may be
		low. Check the signal strength and
		adjust the antenna location and
		direction.
	For more information about connections,
	see “Connecting an antenna” on page 5.
Normal picture but	•	Check volume levels.
no sound.	• Make sure that the TV sound is not
		muted.
	• Make sure that the your converter
		box is connected correctly.
Picture is distorted.	• Make sure that the correct aspect
		ratio is selected.
	• Make sure that the video output is
		connected to the TV.
Available channels	• You can find all the available
are missing.		channels by running the Auto Tuning
		or EZ Add in the on-screen menu
		system.
	•	Adjust the antenna.
	• Check the antenna’s signal strength.
You forgot your	Enter the master password 7777.
password.
The remote control	• Point the remote control at the
does not work		remote sensor on your converter
correctly.		box.
	• Operate the remote control within
		23 feet (7 meters) of the remote
		sensor.
	• Remove any obstacles between the
		remote control and the remote
		sensor.
	• Replace dead batteries with new
		ones.

Specifications

Design and specifications are subject to change without prior notice.

General

Television system	DTV standard ATSC
Channel coverage	Terrestrial 2-69
Dimensions (W × H × D)	Approximately 8.5 × 1.8 × 6.4 inches
	(215 × 46 × 162 mm)
Net weight	Approximately 1.65 lbs. (0.75 kg)
Operating temperature	41°F to 104°F (5°C to 40°C)
Operating humidity	5% to 90%
Power requirement	120V 60 Hz AC

Power consumption	7 W
Input/output
Antenna in	Antenna input, ATSC, 75 ohms
(From Antenna)
Antenna out (To TV (RF))	Antenna output, 75 ohms, RF output
	channel 3 or 4 (switchable)
Video output	1.0 V (p-p), 75 ohms, negative sync,
	RCA jack (1)
Audio output	2.0 Vrms (1 KHz, 0 dB), 600 ohms,
	RCA jack (L, R) (1)

Legal notices

FCC warning

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

FCC Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the product and

•receiver.

•Connect the product into an outlet on a circuit different

•from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician

•for help.

Warning

Do not attempt to modify your converter box in any way without written authorization from Insignia. Unauthorized modification could void the user’s authority to operate this product.

Your converter box is intended to receive and decode signals transmitted according to the ATSC Digital Television Standard A/53 specification and is intended to be used with an appropriate antenna and display device that you must provide.

Energy Star ®

As an Energy Star Partner, Insignia has determined that this product or product models meet the Energy Star guidelines for energy efficiency.

18 www.insignia-products.com