Chapter 2 Installing the LCD TV
Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.
HDTV/TV |
Air/Cable |
VHF/UHF IN |
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
HDTV/TV |
Air/Cable |
VHF/UHF IN |
This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by prying the cover off, following the illustration below.
If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time Lag Fuse (Slow Blow) to replace the fuse.
Firm Plastic Prying Tool
(Using a metal tool may cause shock) |
|
| 4A 250V |
Back of TV | 5x20mm |
Fuse |
BE SURE TO UNPLUG AC POWER CORD BEFORE REMOVING THE FUSE.
Press the
button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main power source when the LCD TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the LCD TV into the standby mode, it does not disconnect the device from the main power source. To completely disconnect the main power source, please remove the power cord’s plug from the socket.
18