Emprex PD-7001 manual Basic Operations, Standby Mode

Basic Operations

Turn on the DVD player

Basic playback

1.Set the player on a table or on a steady surface. 2.Raise the screen to the open position.

3.Press the Power key of the remote control to turn on the unit, you can also press and hold the On/Off button for 3 seconds to turn on the unit.

4.When the power is turned on . The player will automatically search for the disc.

If a compatible disc is available, the unit will start the disc playback automatically.

Standby Mode :

(1). Press Power key to turn off the disc play-

back when the unit is on.

Power (2). When the unit is off, press Power key to

startd disc playback again.

(3). Disconnecting the main power to the device will end the standby state.

Note:

To save battery power, the unit has an auto- screensaver and auto shut-off function. When the unit is stopped or paused, and no operations are performed within 5 minutes, the screen saver mode will be activated auto-

LCD Mode

Play/Pause

Stop

Next

Previous

Fast forward

Fast reverse

Play/Pause: If disc playback is stopped, press this key to make player start again. If in the pre - stop condition it executes memory play function. During disc play- back, press once to pause; press again to resume playback.

Stop: Stops disc playback. Press once to stop the disc playback. (Playback will start at location where you stopped.) Pressing twice will cause a full stop. (Playback will start at the beginning the disc).

Fast forward/Reverse: When you press the Fast forward/Reverse key during playback, the unit will Fast forward/ Reverse the disc. With each consecutive press of the Fast forward/Reverse key, the playback speed increases. There are

4 speed levels for DVD discs in FWD/ REV: 2x,4x,16x,100x. For all other discs, there are 3 speed levels: 2x,4x, 8x. Press the Play key to resume normal playback.

matically. After the screensaver has been on

for 5 minutes, the unit will turn off automati- cally without the resume play feature.

Previous Chapter/Next Chapter: When you press this key, the player will skip to the Previous/Next chapter or track and play automatically.

LCD Mode: The Mode button brings up the LCD picture menu. You can adjust the

picture options: COLOR, CONTRAST, BRIGHTNESS, HUE, REVERSAL, NORMAL and RESET using the arrow and ENTER buttons to make adjustments.

COLOR: adjusts the richness of color.

CONTRAST: adjusts the difference between the light and dark areas.

BRIGHTNESS: adjusts the brightness.

HUE: adjusts the balance between red and green levels.

REVERSAL: turns the image upside down.

NORMAL: adjusts the 4:3 or normal LCD screen format.

RESET: adjusts all MODE options back to the factory settings except NORMAL .

7 8