Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you purchase the TV or when you find that the remote control is no longer operating correctly.
1 Insert two
and - on the batteries to the diagram inside the battery compartment.
■Handle the remote control with care; avoid dropping it, getting it wet, placing it direct sunlight, near a heater, or where the humidity is high .
■Remove the batteries to avoid damage from possible battery leakage whenever you anticipate that the remote
control will not be used for an extended period.
ENGLISH
Connecting an Antenna or Cable
To view television channels correctly, a signal must be received by the set from one of the following sources: an outdoor antenna, a cable television system or a satellite dish.
1
2
Connect the antenna or input cable to the 75 Ω coaxial input on the rear of the TV.
If you are using an indoor antenna, you may need to turn it when tuning your television until you receive a clear picture.
Rear of the TV |
or |
Cable Television |
Network |
11