Insignia NS-BDLIVE01 manual Condensation, Storing discs, Handling discs, System, Network

Page 27

NS-BDLIVE01_09-0086_MAN_V1_ENGLISH.book Page 23 Wednesday, March 11, 2009 9:37 AM

Insignia NS-BDLIVE01 Blu-ray Disc Player

System

Maintaining

 

 

General guidelines

Option

Reset Settings

Clear BD Storage

BD-Live Internet Access

Optical Disc AutoPlay

Description

Resets all settings to the factory default. Press ENTER after you select this option to reset all settings, including the password. The parental controls rating levels you selected are not reset.

For more information, see “Restoring factory defaults” on page 17.

Clears the non-volatile storage (application data area) on a Blu-ray Disc. The application data area is the space on a Blu-ray Disc that stores information such as the subtitle language selection.

When you select this option, a confirmation box opens. If you select Yes, your player erases the Blu-ray Disc application data area.

For more information see, “Clearing BD storage” on page 18

Sets the Internet access level. For more information, see “Setting the BD-Live Internet access level” on page 18.

Turns Optical Disc AutoPlay on or off. For more information, see “Turning Optical Disc AutoPlay on or off” on page 19.

The top and back panels of your player may become hot after a long period of use. This is not a malfunction.

When your are not using your player, make sure that you remove the disc and put your player into standby mode.

If you do not use your player for a long period of time, it may not function correctly. Turn on and use your player occasionally.

Do not place objects on the disc tray.

Do not locate your player:

Near heating devices or in an enclosed vehicle

In an area with a temperature over 104°F (40°C) or humidity over 90%

Dirty places

In an area with direct exposure to sunlight

Condensation

Condensation may form inside your player when:

You move your player from a cold area to a warm area

You use it in a cold room where you have just turned on a heater

Air conditioning is blowing directly on your player

Your player is in a damp place

If condensation forms inside your player, your player will not work correctly. Turn on your player,

remove the disc and leave the tray open, then leave your player on for two to three hours.

To minimize condensation problems, keep the power cord connected to a power outlet.

Storing discs

Network

Do not store discs in a place that is exposed to direct sunlight or heat.

Do not store discs in a place that is exposed to moisture and dust, such as a bathroom or near a humidifier.

Store discs vertically in their cases. Stacking discs or placing objects on discs when not in their cases may cause warping.

Handling discs

To keep a disc clean, do not touch the play side (non-label side) of the disc.

Do not attach paper or tape to the disc.

Option

IP Mode

Test Connectivity

Current IP

Description

Selects the IP configuration mode. Select Dynamic (uses DHCP to automatically obtain an IP address), Manual (lets you manually configure network settings, such as IP address, subnet mask, and gateway settings), or Off (disables the network interface).

Tests your player’s Internet connection by “pinging” an IP address.

Shows your player’s current network configuration.

www.insigniaproducts.com

23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 27
Contents User Guide Page Contents Maintaining Insignia NS-BDLIVE01 Blu-ray Disc Player Introduction Front Package contentsBack Remote control Remove the battery compartment cover Installing remote control batteriesRemote control range To install remote control batteriesTo connect a component TV no sound system Connecting an Hdmi TVConnecting a component TV no sound system To connect an Hdmi deviceStandard AV connection provides a good video connection Connecting a standard AV TVPlayable discs Region codesPlaying a disc Standby modeUsing Media Launcher Turning your player on or putting it intoCreating a playback loop Using subtitlesControlling disc playback Repeating a title or chapterControlling MP3 or WMA playback Selecting the video output resolutionUsing PIP picture-in-picture mode Playing MP3 or WMA filesControlling MP3 or WMA playlist playback Creating an MP3 or WMA file playlistViewing an MP3 or WMA playlist Deleting a file from an MP3 or WMA playlistSelecting the subtitle language Selecting the on-screen menu language Selecting the menu language for a discSelecting the aspect ratio Selecting the output resolutionTo adjust the aspect ratio To select the output resolutionTo turn Film Mode on or off Adjusting the digital audio outputTurning Film Mode on or off Press SETUP. The setup menu opensTo select the PCM downsampling rate Selecting the PCM downsampling rateTo set parental controls Setting parental controlsTo restore factory defaults Changing the passwordRestoring factory defaults To change the passwordTo clear BD storage Setting the BD-Live Internet access levelTo set the BD-Live Internet access level Clearing BD storageTo configure your player’s Internet connection Turning Optical Disc AutoPlay on or offTo turn Optical Disc AutoPlay on or off To test the Internet connection Testing the Internet connectionTo manually configure your player’s Internet connection Viewing the current IP addressLanguage Using the setup menuSetup menu options To use the setup menuParental Control Parental Level Audio ParentalDigital Output Turns Dynamic Range Control On or OffSystem CondensationStoring discs Handling discsOperation Cleaning discs Problems and solutionsFrequently asked questions PowerTV screen and video SoundSpecifications are subject to change without notice BD-Live and USB connectionsOther Copyrights Insignia NS-BDLIVE01 Blu-ray Disc Player How long does the coverage last? What does this warranty cover?How to obtain warranty service? What does the warranty not cover?Insignia NS-BDLIVE01 Blu-ray Disc Player Insignia NS-BDLIVE01 Blu-ray Disc Player English