Lowrance electronic EP-80R installation instructions Adding a Network Node

Page 5

It connects the network nodes, allowing them to communicate across the network. Connections found in the middle of the bus could have T connectors or backbone network cable plugged into one or both sides.

Connections at the end of a network will have the backbone cable plugged into one side and a terminator plugged into the other, as shown in the following figure.

 

 

Backbone cable

Terminator at

Double T

(to rest of bus)

the end of the

 

connector

Cable from

backbone (bus)

 

 

sensor or

Cap for unused

 

display unit

 

 

connector

 

 

NMEA 2000 network node located at the end of a NMEA 2000 backbone.

NOTE:

If you have a double T Connector on your network that is not attached to a device, you must cap the unused connector with a NMEA 2000 cap. This will protect the pin connectors from corrosion. The NMEA 2000 cap looks like a terminator, but has "Cap" stamped into the connector housing.

All T connectors on your network probably will be connected to a device. If you want to add another node to a working network, add another T connector. T connectors may be purchased from LEI (ordering information appears on the back page of this booklet). If you are adding a Lowrance or LEI NMEA 2000 sensor, it will come with a T connector.

Adding a Network Node

You can add a node to any existing connection, anywhere along the network backbone. This connection could be between a T connector and a terminator, between two T connectors, between a T connector and a backbone extension cable or between two extension cables. Wherever you want to add the new node, separate the sockets of the existing connection and install the T connector between them.

5

Image 5
Contents EP-80R Temp Tools and Supplies Installation Network Backbone and Network Nodes Connecting to a Nmea 2000 NetworkAdding a Network Node Additional Network Information Boat Setup LMF-200 EP-80R Temp ConfigurationBoat Setup Reset EP-80R Temp ConfigurationTo reconfigure a temp sensor Screen Rotation Displaying EP-80R Temp Sensor DataCustomizing Pages Page LMF-400 EP-80R Temp Configuration To reset engine-tank configuration Page Displaying EP-80R Temp Sensor data To add a page to the display To customize Quad Analog To customize Quad Digital Page Nmea 2000 Menu/Networking Menu Bus SetupDevice Name EP-80R Temp Sensor ConfigurationTo reset device name to default setting Reconfiguring a temp sensor Unconfiguring a Temp SensorDisplaying EP-80R Temp Sensor Information Page Lowrance Electronics Full ONE-YEAR Warranty For Lowrance 800-324-1356. For Eagle How to Obtain Service…

EP-80R specifications

The Lowrance EP-80R is a cutting-edge electronic device designed to enhance the navigation experience for boaters and marine enthusiasts. This advanced unit is part of Lowrance's esteemed line of marine electronics, providing users with an array of features that prioritize accuracy, reliability, and user-friendliness.

One of the standout characteristics of the EP-80R is its exceptional precision in positioning and navigation. The device is equipped with an advanced GPS receiver that offers rapid and precise location fixes, ensuring that boaters can confidently navigate even the most challenging waters. With its ability to maintain accuracy across various maritime environments, the EP-80R has quickly become a trusted companion for both recreational and commercial users.

The EP-80R features a sleek and modern design, featuring an intuitive interface that makes it easy for users of all skill levels to operate. Its large, high-resolution display provides clear visibility even in bright sunlight, allowing boaters to monitor their location and navigation data effortlessly. Additionally, the device includes customizable screen options, enabling users to tailor the display to show the information most relevant to their journey.

In terms of technology, the Lowrance EP-80R integrates seamlessly with the Lowrance vessel systems, allowing it to share data from other onboard devices. This connectivity ensures that users can access comprehensive navigation information, including sonar depth readings, water temperature, and more, all in one centralized unit. Users can take advantage of the EP-80R’s Bluetooth capabilities, enabling them to connect to smart devices for enhanced data sharing and control.

The EP-80R also supports advanced mapping features, providing access to high-resolution charts that can be updated effortlessly. Whether navigating coastal waters or exploring offshore destinations, the EP-80R offers various mapping options that enhance user experiences. The ability to set waypoints and routes easily ensures that boaters can plan their journeys with confidence, reducing the likelihood of navigational errors.

Finally, built with durability in mind, the Lowrance EP-80R is designed to withstand the harsh marine environment. Its rugged construction ensures that it can endure exposure to saltwater, humidity, and UV radiation, making it an ideal choice for long-term use in diverse conditions.

In summary, the Lowrance EP-80R represents a perfect blend of advanced technology, user-friendly design, and robust features, making it an excellent investment for anyone serious about navigation and marine activities.