Miscellaneous Function Adjustments, Picture

Miscellaneous Function Adjustments

The following description is for the main signal source “Analog RGB”

Note: The text within the brackets relate to the same buttons on the remote control.

1. PICTURE

1-1 Brightness

Press and hold the MENU button until the OSD screen appears, and press PROG▲▼ buttons to select Brightness, then you can easily adjust the desired brightness with the VOL +/- buttons.

Note :

You may need to re-adjust brightness after the TD30 warms up. Too bright of a setting could tire out your eyes easily.

1-2 Contrast

Press and hold the MENU button until the OSD screen appears, and press PROG▲▼ buttons to select Contrast, then you can easily adjust the desired contrast with the VOL +/- buttons.

1-3 Auto Picture

Press and hold the MENU button until the OSD screen appears, and press PROG▲▼ buttons to select Auto Picture, then press the VOL +/- buttons to perform automatic adjustment.

Note :

Perform the Auto Picture first after the installation is completed for the first time.

Use the full and bright screen to perform Auto Picture. We recommend that you should perform Auto Picture under a Windows environment, and doing so can adjust the screen to the best display.

The Auto Picture function will disappear when the main signal source is

DVI