InFocus RS-232C Ex. When the SetID wants lighting 1st person TV, Picture Sound Setup Miscellany

Page 7

Ex. When the Set_ID wants lighting 1st person TV

>mpo0101

>01mpo01

Command : " mpo0101" (mpo : Power / 01 : Set_ID / 01 : Power On)

Response : " 01mpo01" ( The Set_ID lights 01st person LCD&PDP)

When the Set_ID wants knowing the Power condition of 3rd person TV

>mpo03ff

>03mpo01

Command : " mpo03ff" (mpo : Power / 03 : Set_ID / ff : Present situation question)

Response : " 03mpo01" ( Status : Power On)

When the TV with 12th Set_ID wants Volume 34

>svo1234

>12svo34

Command : " svo1234" (svo : Volume / 12(Dec) : Set_ID / 34(Dec) : Volume size)

Response : " 12svo34" ( Set_ID 12th person PDP Volume 34)

When wanting putting out all the member of all TV

> mpo0000

Command : " mpo0000" (mpo : Power / 00 : All PDP which are connected / 00 : Power)

when it wants to sees Last Command it does not change a set not to be

> ff00100

Command :" ff00100" (ff0 : The Last the Command it asks / 01 : Set_ID / 00 : Condition question)

3.Communication Table 1) Command structure

C1

C2

C3

P : Picture

S : Sound

M : Setup (Miscellany)

T : TV

Image 7
Contents RS-232C Ntsc Manual Control LCD & PDP through Serial Port Run ‘Hyper Terminal’ Example Enter any name Select COM Port If you check the box TV doesn’t work correctly Set the port properties Set the ASCⅡ SetupCharacter Byte Command FormatControl TV through Serial Port Response FormatPicture Sound Setup Miscellany Ex. When the SetID wants lighting 1st person TVC1 C2 PictureOFF DVI AV1AVC OFF CC2 Miscellany SetupSAP CC1AIR ~99 ~27IRC