1.Save all files and shut down the desktop.
2.Turn off the computer.
3.Turn on the computer. Quickly press F11 when this message is displayed on the screen: ...″To start the Product Recovery program, press F11″ .....This message is displayed for only a few seconds.
Note: If this message does not appear, you can use a Recovery Repair diskette to get access to the Product Recovery program.(see“Creating a Recovery Repair diskette” on page 32 for instructions for making the Recovery Repair diskette)
4.From the list displayed on the screen, select the operating system you want to recover.
5.Select the recovery options you want, and follow the instructions on the screen.
Creating the Service Partition
To create Service Partition and install the preloaded system from Recovery CD, do the following;
To create Service Partition [SP]:
1.Erase all partitions on the
2.Boot with Recovery CD (and boot diskette if required).
3.A menu will appear stating ″Your computer originally included a Product Recovery program ...
Reinstall the Product Recovery Program? (Y/N) [ ]″.}.
Note: If the
4.Enter ″Y″ and Service Partition will be created and loaded with D2D files.
Note: If you do not want to create Service Partition, press ″N″ , and the d then go to step 8.
5.Press ″Enter″ at next window to continue.
*Service Partition will be created. System will automatically reboot during this process.
*Recovery process will copy some files to the Service Partition, PKUNZIP others
*Follow prompts - you may be prompted to change CDs.
*System will reboot when complete, continue to step
6 to install preloaded system.
Install preloaded system from CD:
6. Boot with Recovery CD (and boot diskette if required)