Gefen GEF-HDMI1.3-2-3GSDI user manual DIP Switch Features, Switch Description, Factory Default

DIP SWITCH FEATURES

The DIP switch feature panel is located on the underside of the HDMI to 3GSDI Converter. Please use the diagram and chart below to configure the DIP switch settings. Adjustments should be made with a small pointed object such as a toothpick, a mechanical pencil with the lead retracted or a mini screwdriver.

DIP SWITCHES

Switch	Description	OFF	On
		(Factory Default)
1	Test pattern	Off	On
2	N/A	N/A	N/A
3	RGB Input Range	16-235(limited)	0-255 (full)
4	N/A	N/A	N/A
5	3G Mapping	Direct (A)	Dual Link (B)
	(425M Level)
6	N/A	N/A	N/A
7	N/A	N/A	N/A
8	N/A	N/A	N/A

DIP 1 - The color bar test pattern is in 720p (60Hz) format. No valid input is necessary at the SDI connector to use the test pattern.

DIP 3 - The RGB Input Range switch is used to toggle between Limited-Range RGB or Full-Range RGB: 16-235 or 0 - 255.

DIP 5 - Please note that some 3G-SDI equipment does not support both level A and level B. Set this switch according to the supported 3G level of your SDI equipment connected to the HDMI to 3GSDI Converter.

9