CONNECTING THE DISPLAYPORT SUPER BOOSTER CABLE
How to Connect the DisplayPort Super Booster Cable
1.Connect the DisplayPort Super Booster Cable’s male end to the DisplayPort source. The male end has no lights or adjustment controls on it and is considerably smaller than the larger female end.
2.Connect the HD display to the large female end of the DisplayPort Super Booster Cable using a short
3.Should it be necessary (see NOTE below), plug the power supply into the female end of the DisplayPort Super Booster Cable.
4.The Power Indicator LED will glow GREEN when a good link is established back to the DisplayPort source and RED when the connection to the source is interrupted or not present.
NOTE: In normal scenarios, the AV source device powers the cable. If sufficient power is not present, the Power Indicator LED will be OFF. In this situation the included 5V DC power supply can be connected to the Super Booster end of the cable (please see diagram below) to provide power.
Female Side (Rear)
Rear of Female Side Showing 5V Power Jack for the included Power Supply
5