Introduction, Connecting example | Fostex COP-1/96k specification

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER - SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND.

Introduction

Thank you for purchasing the Fostex Model COP-1/96k.

The COP-1/96k is a digital signal (sampling frequency: 32kHz~96kHz) conversion adaptor for converting "Light (OPTICAL) to Coaxial (COAXIAL)" or "Coaxial (COAXIAL) to Light (OPTICAL)." The COP-1/96k allows you to connect digital equipment with differing digital input and output connections for digital signal copying*. The COP-1/96k makes it possible to use a DAT recorder that only has a coaxial digital signal input and output connectors as the master recorder for use with the Fostex Digital Multitracker.

<Notes>

*Digital copying is not possible if the source material is protected by SCMS.

*Connect the AC adaptor only to a wall outlet that meets the conditions stated in the Specification Chart. Failure to do so could be extremely dangerous and may result in fire or electric shock.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Names and functions of the connectors

Connecting example

Equipment with only an OPTICAL connectors

OPTICAL

"WARNING"

"TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE."

SAFETY INSTRUCTIONS

1.Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions - The safety and operating instructions should be retained for future reference.

3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions - All operating and use instructions should be followed.

5.Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.

6.Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.

10. Power Sources - The appliance should be connected to a power
	supply only of the type described in the operating instructions or
	as marked on the appliance.
11. Grounding or Polarization - The precautions that should be taken
	so that the grounding or polarization means of an appliance is not
	defeated.
12.	Power Cord Protection - Power supply cords should be routed so
	that they are not likely to be walked on or pinched by items placed
	upon or against them, paying particular attention to cords at plugs,
	convenience receptacles, and the point where they exit from the
	appliance.
13.	Cleaning - The appliance should be cleaned only as recommended
	by the manufacturer.
14.	Nonuse Periods - The power cord of the appliance should be
	unplugged from the outlet when left unused for a long period of
	time.
15.	Object and Liquid Entry - Care should be taken so that objects do
	not fall and liquids are not spilled into the enclosure through
	openings.
16.	Damage Requiring Service - The appliance should be serviced
	by qualified service personnel when:
	A. The power supply cord or the plug has been damaged;
	or

OPTICAL input/output connectors (Optical)

OUT

COAXIAL

OPTICAL

CONVERTER

COP-1

		DC IN
IN	OUT	9V POWER

AC adaptor jack

Power indicating LED

COAXIAL input/output jacks (RCA)

DIGITAL IN DIGITAL OUT

OPTICAL cables

OUT

	COAXIAL
	OPTICAL
	CONVERTER
	COP-1
	DC IN
IN	OUT	9V POWER
		AC adaptor
RCA cables		AC outlet
		AC outlet
DIGITAL OUT	DIGITAL IN

COAXIAL

Equipment with only an COAXIAL jacks

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

B. Objects have fallen, or liquid has been spilled into the appliance;

Product Specifications

7.Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation - The appliance should be situated so that its location or position dose not interfere with its proper ventilation.

For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

	C. The appliance has been exposed to rain; or
	D. The appliance does not appear to operate normally or exhibits
	a marked change in performance; or
	E. The appliance has been dropped, or the enclosure damaged.
17.	Servicing - The user should not attempt to service the appliance
	beyond that described in the operating instructions.
	All other servicing should be referred to qualified service personnel.
18.	The appliance should be situated away from drops of water or
	spray of water.
19.	Objects containing liquid such as vase must not be put on the
	appliance.
20.	The appliance is not completely isolated from the power supply
	even if the power switch is at off position.

COAXIAL IN (x1)
Connector	: RCA pin jack
Input impedance	: 75 Ω
Reference input level	: 0.5V p-p
COAXIAL OUT (x1)
Connector	: RCA pin jack
Output impedance	: 75 Ω
Reference output level	: 0.5V p-p (at connecting a 75
	Ω load)
OPTICAL IN (x1)
Connector	: Optical connector
Format	: IEC 60958 (S/P DIF)
OPTICAL OUT (x1)
Connector	: Optical connector
Format	: IEC 60958 (S/P DIF)

Complying Sampling Frequency	: 32kHz ~ 96kHz
Power Supply	: DC9V, 50mA
	(Use the exclusive AC adaptor
	included with COP-1/96k.)
AC adaptor power supply	: 120VAC, 60Hz
	230V~, 50/60Hz
Physical Dimensions (mm)	: 70 (W) ×32 (H) × 83 (D)
Weight	: Approx. 300g
	(excluding accessories)
Accessories	: AC adaptor×1, Owner's Manual

* Product appearance and specifications subject to change without notice.