Channel Vision A0302 manual Speaker-Level Input from An amplifier, Line-Level Input Not amplified

Using the input switch

This switch allows you to select which input connector you want to use to route signals to the RCA outputs and the Amp-Link connector.

Speaker-Level

input from

an amplifier

SUB

L/R

		L+
		JP2
		TB1
		ni L
L+L		ni R
		Gnd
-R	R+
-		4V2
		Gnd

Line-Level

input

(not amplified)

SUB

L/R

		L+
		JP2
		TB1
		ni L
L+L		ni R
		dnG
-R	R+
-		V24
		dnG

Set switch to “SPKRS IN”

Amp-Link Pin Out

Set switch to “L/R IN”

Connect as shown.

Note: The Left and Right line-level input share a ground connection.

The A0302 provides a special Amp-Link connection that is intended to be used with Channel Vision A0240 amplifier. The pin out is provided here for reference.

Shield Audio Ground

Pin 7 Speaker R-

Pin 3 Speaker R+

Pin 5 Audio R+

Pin 8 Power +24VDC

Pin 6 Speaker L-

Pin 1 Speaker L+

Pin 4 Power Ground

Pin 2 Audio L+

7