Remote Control
In This Chapter
This section provides a detailed explanation on using remote control functions with your card.
DashBoard Control System Software
The DashBoard Control System enables you to monitor and control openGearTM frames and controller cards from a computer. The DashBoard software and manual can be downloaded from the Cobalt Digital Inc. website (www.cobaltdigital.com).
Using the Menus and Menu Descriptions
You must first install the DashBoard Control System software on your computer. Refer to the DashBoard Owner’s Manual for software installation procedures and for using the DashBoard interface.
The following pages list the parameters from the menu tabs available in the DashBoard software when connected to a 9341.
Menu | Item | Format | Description |
Card Info | Product | 9341 | The product name |
|
|
| |
| Manufacturer | Cobalt Digital Inc. | The manufacturer of the |
|
|
| product |
| Software Release | ### | The release number of the |
| Number |
| firmware in this card |
| Software Build | ### | The internal build number |
| Date |
| of this software |
| Software Build | ### | The date and time the |
| Time |
| software was created |
| +12 V Power Rail | #.## W | Positive Supply Power |
|
|
|
|
| #.## W | Negative Supply Power | |
|
|
|
|
| Video Input | ############ | Detected Video Standard |
| Standard | on SDI or Analog Input | |
|
| ||
| SSN | ############ | Displays the Silicon Serial |
| Number of the card. | ||
|
|
| |
| Audio | OK / Analog Input | Status indicator for analog |
| Clipping | audio input | |
|
|
Page 16 of 22 | 9341 Owner’s Manual • (V 1.0) |