Menu Guide
System Setting
10. Menu Transparency
From 20 to 63 will give the variable transparency on Video and OSD screen.
Select an menu blending ratio and press OK button.
The transparency will be applied on the screen.
11. Change PIN Code
From here you can change the PIN code from the standard 0000. DO NOT FORGET IT! Without it, you are not able to access to any of the functions where the code is required.
You can change password for Parental Lock and Receiver Lock simultaneously.
1.Input the current PIN code using NUMERIC button on the remote control.
2.In the highlighted new PIN code, input a new PIN code.
3.To verify the new PIN code,
If the PIN Code is correct, the message "Success" will be displayed on the display window.
Note If you forget the PIN code, press the RGYB(Color) button in sequence. (i.e. Red
The PIN code will be changed to "0000"
12. Parental Lock
When you change "Parental Lock" to "On" or "Off", service channel can get or not from that set values. If you select "On", you may need PIN code every time you select the lock channel program as you set in the channel control.
If you select "Off", you can see all channels without PIN code.
DIGITAL TERRESTRIAL RECEIVER
29