Haier L32A9-AKF, L32A9 -AK manual Adjust menu, Display Mode, Color temperature, Black Stretch

Adjust menu

OK Q.VIEW

CH+

VOL- MENU VOL+

CH-

PSMSSM

1.Press MENU and VOL+/- button to enter the ADJ. menu.

2	. Press CH+/- to select	Display Mode	Normal
		Adjust
	desired item.
3		RGB
	. Press VOL+/- button to	Default
	adjust the values level.	Auto Sync.
		Color Temperature	Normal
4	. Press menu to exit.
		Black Stretch	On

A

B

C

Display Mode

Repeat step 2 and 3 to set the Display Mode.

Normal

Choose Normal when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.

Wide Screen

Choose Wide Screen when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.

4:3 Mode

Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the

left and right sides.

You can also press PIC.SIZE button on remote controller to select the desired picture ratio.

Color temperature

Repeat step 2 and 3 to set the Color temperature.

There are four kinds of modes (i.e., "Normal","Warm" , "Green","Cold")can be selected in turn.

This will increase or decrease Warm (red) and Cool (blue) colors to suit personal preferences. Select Cool to give the white colors a blue tint, Normal to give the white colors a neutral tint, Warm to give the white colors a red tint. Green to give the white colors a green tint.

Black Stretch

Black Stretch-(Automatically Increases the Contrast Rage)

Repeat step 2 and 3 to set the Black Stretch.

29