Motorised System, GB39 | Humax F2-Green manual

Motorised System

DiSEqC 1.2 User Instructions

If you have a Motorised System for DiSEqC1.2, you can set the Motorised System item to Enable on Category window and add necessary functions. When a Motorised System is set to Enable, you cannot select DiSEqC Input items but, instead, you can use new menus (Satellite Name, DiSEqC Command Mode, Movement and Limit Setting) on Category window and the Goto/Store items are added to Operation window(User mode).

In case that a Motorised System is Enabled, if you have defined Satellite Name on Category Window and also created the location information about the satellite, you can drive the motor which corresponds to the Satellite Name by moving the cursor and selecting ‘Goto’. Otherwise, you need to move to the Item window by using the OK and buttons in the DiSEqC Command mode of Category window and select Installer. Then, you will find that the Reset command is added as Motor Control Command on Operation window, which is different from the User mode.

After selecting your Motorised System as Installer, move to and select the Movement item on Category window, and move the cursor to Item window by using the OK and buttons and then select East or

West by using the and OK buttons. Now, the motor will start to be driven.

When it starts to be driven, move East/West until you find the location at which signal quality is best. If multiple locations are found, you should select other frequency and drive the motor again until only a single location is found.

You can select Stop at the best location by using the signal level and signal quality bar on the bottom of the window and then move the cursor to Operation window and select Store the item to save the current location information. Be careful that if you exit the menu without saving this location information, the current Satellite location information will be lost. Repeat the above steps for other Satellites to use your Motorised System for them. Once you have set the location information for a satellite, you can perform fine-tuning for its location information when you start to search services from the location information previously saved.

GB39

F2-Green specifications

The Humax F2-Green is a versatile satellite receiver designed for delivering an exceptional digital television experience. Combining advanced technology with eco-friendly features, the Humax F2-Green stands out in the competitive market of satellite receivers.

One of the primary highlights of the Humax F2-Green is its commitment to sustainability. This receiver utilizes a low power consumption design, minimizing energy usage while maintaining high performance. The device is equipped with a standby management system, ensuring that it does not consume unnecessary energy when not in active use. This environmentally conscious design helps users reduce their carbon footprint, making it an attractive option for eco-friendly consumers.

The Humax F2-Green supports a myriad of broadcast standards, since it is compatible with both DVB-S and DVB-S2 formats. This capability allows users to access a wide range of channels across various frequencies, providing an extensive selection of programming options. The advanced DVB-S2 technology ensures enhanced signal reception and a more stable viewing experience, particularly for HD channels.

Its integrated Electronic Program Guide (EPG) offers users a convenient way to navigate through available channels and programming. The user-friendly interface is intuitive and allows quick access to information about upcoming shows, making it easier to plan viewing schedules. Additionally, the receiver supports various functionalities such as Time Shift, allowing users to pause live TV and resume later, granting more control over their viewing.

The Humax F2-Green also features HDMI and SCART outputs for seamless connection to modern televisions and audio devices. The HDMI output provides the best video and audio quality, ensuring that users enjoy a crystal-clear viewing experience.

Furthermore, the device comes with USB connectivity, enabling users to record their favorite shows on an external storage device. This handy feature allows for more flexibility in managing content and ensures that users won’t miss their favorite programs.

With its combination of eco-conscious technology, versatile reception standards, and user-friendly features, the Humax F2-Green satellite receiver exemplifies a perfect blend of performance and environmental responsibility. Whether you are a casual viewer or a dedicated TV enthusiast, the Humax F2-Green is tailored to enhance your viewing experience while contributing to a greener planet.