Manual Satellite Search | Humax CRCI-5500 guide

Motorised system

To set the West Limit:

a)Select Movement and use the buttons to move your motor East or West until the motor is at

the position you wish to use as your West Limit. Use the buttons to stop the motor at the correct position.

b)Highlight the Store West Limit option and press the button to store the current position as your West Limit.

5.Manual Satellite Search

The purpose of this is to set the motor position for each satellite manually. This is useful if the satellite you require is not available from the pre-programmed list (see 3 above).

To do this, you must access the Satellite Settings menu. Do as follows ;

1.Select Service Searching from the main menu and press the button, to display the Service Searching menu.

2.Select the Manual Search option and press the button, to display the Manual Search menu. Select the relevant Antenna Alternative that you are using for this satellite.

3.Enter the Frequency, Polarisation, Symbol Rate and FEC of a transponder on the satellite you wish to find. This transponder information should be unique to this satellite.

4.Select the Antenna Alternative option and press the button, to display the Satellite Settings menu.

5.Highlight the option DiSEqC Command Mode and using the buttons change this to Installer.

6.Highlight the option Satellite name and use the buttons to select the satellite you want to find, use others if the name of the satellite you want does not appear.

7.When you have selected the satellite you wish to find, go down to the Movement option and again using

the buttons to start the motor moving.

8.You should move the motor as far west as possible and the move it east so that you cover the complete movement range of the motor.

9.During the move from west to east the Signal Quality bar should register a signal once. This is the position of the satellite. If there are two or more different positions which registers a signal, then you must choose another frequency that is unique to the satellite you want.

10.Use the Signal and Strength Quality bar at the bottom of the screen to judge the best position of the dish.

11.Use the buttons to stop the motor when required.

12.When you have the best position of the dish go to the Motor Control option and using the buttons

select store and press the button. The position of the satellite should now be stored.

13.If you do not store this position, it will be lost when you exit the menu.

14.Repeat the process for each satellite if required, remembering to use a different antenna alternative for each satellite.

CRCI-5500 specifications

The Humax CRCI-5500 is a versatile and robust satellite receiver that has garnered attention for its impressive capabilities and user-friendly design. As a leading choice for satellite television enthusiasts, this receiver brings a wealth of features and technologies that enhance the viewing experience.

One of the primary features of the Humax CRCI-5500 is its ability to receive high-definition broadcasts. With support for multiple video formats, including MPEG-4 and H.264, users can enjoy sharper images and clearer audio quality on their televisions. This makes it an ideal choice for those wanting to experience the full potential of their HD-ready screens.

The receiver is equipped with a built-in digital video recorder (DVR) functionality, allowing users to pause, rewind, and record live television. With a generous storage capacity, viewers can save their favorite shows and movies, ensuring they never miss a moment of entertainment. The intuitive interface makes it easy to navigate recorded content, providing a seamless user experience.

Another standout characteristic of the Humax CRCI-5500 is its support for various connectivity options. With HDMI output, users can connect the receiver to their television with a single cable, simplifying setup and reducing clutter. Additionally, the receiver features USB ports for easy media playback and software updates, keeping the device current with the latest advancements.

User-friendliness is a hallmark of the Humax CRCI-5500. The receiver boasts an easy-to-use electronic program guide (EPG), which allows viewers to browse channels and schedule recordings effortlessly. The remote control is ergonomically designed to provide quick access to essential functions, ensuring that navigating through the menus is straightforward.

In terms of compatibility, the Humax CRCI-5500 supports various satellite systems, making it a versatile option for users across different regions. Its ability to handle multiple satellite feeds allows for greater channel choices and flexibility, catering to diverse viewing preferences.

Ultimately, the Humax CRCI-5500 combines innovative technology with practical features, resulting in a satellite receiver that fulfills the needs of modern viewers. With its emphasis on high-definition content, user-friendly operation, and powerful recording capabilities, it stands out as a solid choice for anyone seeking to enhance their home entertainment system. Whether for binge-watching shows or catching the latest sports events, the Humax CRCI-5500 is equipped to deliver an engaging viewing experience.