Haier 29F3A manual Watching TV program, How to select TV program, Tune

Watching TV

You can watch TV program in a preset channel.

Watching TV program

How to select TV program

Select the desired program

1 Using "Program number" buttons

Directly enter the channel number with the numeric keypad on the remote control.

To select channel numbers from 10 ~ 99 press [-/--] button and enter the two digit channel number

To select channel numbers from 100 ~ 218 press [-/--] button twice and enter the 3 digit channel number

2 Using the CH+/- buttons

Press the CH+ button to select a channel number in number

increasing direction.

Press the CH- button to select a channel number in number

decreasing direction.

Select the desired sound

Press the VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~99. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.

TUNE	If the colour or sound of a channel is abnormal
	Usually this should be set in the
	Auto position. However if the
	colours displayed on the screen	TUNE
	are incorrect you can manually
		COLOUR	AUTO
	select the correct colour system.	SOUND	DK
	When finish remember to turn it	BAND	VHFL
	back to auto again so that other	SKIP	OFF
	programs will still work correctly.	PROGRAM	0
	To select the colour change	SEARCH
	option press the TUNE button	FINE TUNE
		AUTO SEARCH
	on the remote control.
	If picture colour is abnormal
	Use the CH+/- buttons to select Colour then the
	VOL-/+ buttons to change between Auto, PAL, NTSC,
	SECAM and NTSC443. Press the EXIT button to save

the setting.

If the picture sound is abnormal

Use the CH+/- buttons to select Sound then press the

VOL-/+ buttons to select the sound system.

In general, DK, BG will display in turn.