Installation Menu
Time Settings
The time and date must be programmed to enable the receiver to display the correct information in information messages and for operation of the timer (as well as on the front panel in Standby mode).
| The internal clock is set as follows: |
| a) Apply the broadcast time (default). In this case the time |
| difference between GMT and the location (in Germany + 2 |
| hours in Summer, + 1 hour in Winter) must be allowed for. |
| b) If you select «Off» in the first field, you will need to enter the |
| time and date manually using the number pad. |
Note: | It may be that some channels do not transmit the correct GMT time. |
| In this case the receiver will display an incorrect time. To display the |
| previous time, tune in to a different European channel and wait a few |
| minutes for the receiver to display the correct time again. |
25