Fortec FS-4500 manual Local Longitude, Local Latitude Press, Single Satellite Search

6.If select USALS, Delete All item will turn grey.

Local Longitude, Local Latitude: Press

keys to switch between West and East,

or press keys to switch between North

and South. Press OK key to enter into the editing mode. Use numeric keys (0-9)to input the longitude or latitude, press MENU key or EXIT key to exit. The range of the longitude is from 0 to 180,while the range of the latitude is from 0 to 90. If the inputted value is not in this range, system will pop up a dialogue "Out of Range" when exit from this window. You can press OK key to close this dialogue.

7.Motor Setting: Press OK key to enter into the

Motor setting window.

Satellite, Transponder: Press keys to select satellite or transponder, or press OK key to pop up the drop-down list and select in the list.

2.4 Single Satellite Search

1.Satellite : Press keys to select the satellite in circle. Or press OK key to pop up the drop-down list, then select the desired

satellite in the list and press OK key to confirm.

2.FTA Only: Press keys to select between Yes and No.

3. Scan Channel: Press keys to

select among TV+Radio, TV Channel, Radio.

4.Network Search: Select between No and

Yes. This item turns grey when Auto Scan is selected in the following Scan mode item.

5.Scan Mode: Press keys to select between Auto Scan and Preset Scan. Auto Scan is Blind scan, while Preset Scan is to

search the preset frequencies.

6. Search: Press OK key to start searching.