Audiovox SRSIR-001FM, SRSIR-001FMR manual Presetting Desired Channels, To flash for 5 seconds

PRESS KEYPAD BUTTONS

TO SELECT DESIRED

CHANNEL

CHANNEL NUMBER	PRESS THE SHIFT
FLASHES	BUTTON

Figure 7. Accessing Channels

SELECTING CHANNEL CATEGORIES (only in Category Mode)

This section describes the procedure used to select a specific group or category of entertainment. Entering into category mode can be accom- plished either by Pressing (SFT)+0981+(SFT) or to quickly shift between Category mode and Channel mode, momentarily Press and release (SFT) then Press and Hold (SFT) for 2 seconds, “ENTER CATEGORY TUNE” or “ENTER CHANNEL TUNE” will be displayed .

1.	With the system powered up, momentarily press the Shift (SFT)
	button causing the first channel number in the current category
2.	to flash for 5 seconds.
	While the number is flashing, momentarily press and release
	either directional button (WX) a desired category is reached.
	The category will advance one at a time and will also flash for 5
	seconds. If no further advance is made, the flashing will stop
3.	and the category will then remain steady.
	To advance rapidly in the chosen direction (Up or Down) and
	while the channel number is flashing, momentarily press and
	release either directional button (WX) in a rapid manner. Re-

The channel tuning will automatically wrap around from the last to the first channel in that category or vice-versa. When a new category is chosen, the radio will automatically select the first channel in that category.

NOTE: If a directional button is Pressed and Held channels will begin to scroll in numerical sequence through all categories until the button is released. This navigation mode will continue to function in the same manner in the new category. The user must exit this mode before attempting to perform any other function. To exit this mode, enter Shift (SFT) 0980 Shift (SFT).

PRESETTING DESIRED CHANNELS

This section describes how to preset up to 20 channels on your SCU (two groups of 10 channels, upper and lower) for rapid and easy access. Proceed as follows:

1.Select the desired channel you wish to save in memory by using the directional buttons (WX), direct access method, or category select tuning method.

2.With the desired channel displayed, press and hold any one of the numbered keypad buttons until the confirmation tone (or second tone) is heard

(Refer to Confirmation Tone(s) Function). Continue with this process until the first group of 10 preset channels is loaded (lower group).

NOTE: There is a preset channel group indicator icon located in the top right corner of the SCU display. This is used to determine which group you are in.

·(SR1) = Lower Preset Channel Group (first 10 channels)

·(SR2) = Upper Preset Channel Group (next 10 channels)

3.Repeat the procedure in steps 1 and 2 to save nine other desirable channels for quick access.

lease the directional button when a desired channel is reached.

CH

4

PRESS AND HOLD ANY NUMBER BUTTON (0-9) TO COMMIT THE CHANNEL TO PRESET MEMORY

C A T E G O R Y /	C A T E G O R Y /	PRESS
GROUP NUMBER	GROUP	SHIFT

PRESS UP BUTTON TO ADVANCE TO NEXT HIGHER CATEGORY

PRESS DOWN BUTTON TO ADVANCE TO NEXT

SELECT THE DESIRED CHANNEL

THE PRESET MEMORY LOCA- TION APPEARS HERE

FLASHES

LOWER CATEGORY

Figure 9. Setting Preset Channels

Figure 8. Selecting Channel Categories

7

128-6374A

7 of 12