Sirius Satellite Radio XTR7CK manual Channel Block, Changing the Lock/Unlock Code

Channel Block

The XACT Sirius XTR Receiver has the ability to lockout the use of any channels you do not want others to access without your permission. The locked channel will not appear when the user changes channels with the Channel Switch. When the user tries to access a locked channel using the Direct Tuning function, the “Enter Code” screen will be displayed and the channel will not be accessed until the proper code is entered.

While in the “Menu Options” List mode, follow the steps below to Lock a channel:

1.Use the Channel Switch to highlight the “Channel Block”. Press SEL.

2.Select “Lock/Unlock” from the Lock Options Menu (below left) and press SEL.

3.Use the Channel Switch to select the channel you want to lock. Press SEL (below right).

Channel Block	001	CH Name
Lock/Unlock	002	CH	Name L
Edit Code	003	CH	Name

Changing the Lock/Unlock Code

The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default lock code is “1111”. This code can be maintained or changed. To change the lock code, perform the following procedure while in the “Menu Options” List mode:

1.Use the Channel Switch to highlight “Lock Options”. Press SEL.

2.Select “Edit Code” from the Lock Options Menu and press SEL.

3.Enter your current code or the default code “1111”.

4.The “New Code” prompt will appear. Enter your new four digit code using the 1-6 number buttons. You will then be prompted to confirm the new code by entering it again.

5.The lock code is now changed.

Note: You can use this same method to edit the code after it has changed from the default.

Enter Code

# _ _ _ _

26

XTR7CK User Guide