Player Menus
The Sound menu
Play |
|
Play Mode |
|
Parental Control |
|
Display |
|
Sound | Sound Logic |
Languages | Digital Output |
EN | Virtual Surround |
Sound Logic
You can adapt your player to other equipment and access specific functions with the Sound menu.
1.Select the Sound option in the main menu using the
and 
buttons and press OK to confirm.
2.Select an option using the 
and 
buttons, and press OK to confirm.
You can use this function to control the different sound levels via dynamic compression. It improves the quality of the sound track at a low volume and quietens the loudest sounds.
Select an option using the 
and 
buttons, and press OK to confirm.
Note:This function is available only on DVD discs recorded in Dolby Digital.
Digital Output
Depending on the amplifier or TV your appliance is connected to, you must set up DIGITAL AUDIO output so that it transmits the appropriate digital signals. If the device connected to the DIGITAL AUDIO OUT socket does not support Dolby or DTS signals, neither Dolby Digital nor DTS must be selected.
Select one (or two) option(s) (Dolby Digital or/and DTS) depending on the disc format and the type of sound you want to obtain, then press OK to confirm.
Notes:
DTS is a digital sound compression technique developed by Digital Theater Sound Systems for digital multichannel audio signals. “DTS” and “DTS Digital Out” are trademarks registered by Digital Theater Systems Inc.
Dolby and the 
are trademarks of Dolby Laboratories Licensing Corporation. Dolby Digital is a sound compression technique developed by Dolby Laboratories for digital audio multichannel signals.The Dolby Digital system supports any audio channel configuration, from stereo sound (2 channels) up to the digital “surround” sound 5.1.
Virtual Surround
This function provides you with virtual reproduction of the multichannel sound of a Dolby or DTS film onto the two channels of your TV or stereo amplifier.The sound effects of a 5.1 system are then simulated.
Set the function to On using the 
and 
buttons.
20