Dell MD1400 manual Enclosure Management Module

Page 16

Figure 10. Removing and installing a hard drive into a 3.5-inch hard disk drive carrier

1.

screws (4)

2.

hard disk drive

3.hard disk drive carrier

Installing a hard disk drive into a hard disk drive carrier

1.Insert the hard disk drive into the hard disk drive carrier with the connector end of the hard disk drive at the back.

2.Align the screw holes on the hard disk drive with the back set of holes on the hard disk drive carrier.

When aligned correctly, the back of the hard disk drive is flush with the back of the hard disk drive carrier.

3.Install and tighten the four screws to secure the hard disk drive to the hard disk drive carrier.

Enclosure Management Module

An enclosure with redundant enclosure management contains two enclosure management modules (EMM). You can cable your enclosure either in a single port, redundant mode or in a multi-mode configuration. If only one EMM is installed in your enclosure, it must be installed in EMM 0. You must install the EMM blank in EMM 1.

NOTE: EMMs can be removed and installed without turning off the enclosure.

CAUTION: It is recommended that you do not remove an EMM while data is being transferred.

CAUTION: Replacing or installing an EMM that is connected to a host server causes it to end communication with the enclosure and requires a restart of the host server.

16

Image 16
Contents Dell Storage MD1400 Enclosures Page Contents Troubleshooting your enclosure Getting helpFront-panel features and indicators About your enclosureFront-bezel features and indicators Front-bezel features and indicatorsHard disk drive indicator patterns Hard disk drive indicatorsBack-panel features and indicators Enclosure Management ModuleEnclosure failover when two EMMs are installed EMM thermal shutdownPower indicator codes Other information you may needPage Front bezel optional Recommended toolsRemoving the front bezel Installing the front bezel Safety Models AMT, E03J, and E04JHard disk drives Removing a hard disk drive blankInstalling a hard disk drive blank Removing a hard disk driveInstalling a hard disk drive Removing a hard disk drive from a hard disk drive carrierInstalling a hard disk drive into a hard disk drive carrier Removing an EMM blank Installing an EMM blankRemoving an EMM Installing an EMM Removing and installing an EMMAC power supply unit or cooling fan module Removing an AC power supply unit or cooling fan moduleInstalling an AC power supply unit or cooling fan module About DC power supply unitsPower indicator codes LED DC power supply module back panel features Removing and installing the DC power supply unitKit Contents Input RequirementsRequired Wires Assembling and connecting the safety ground wireWiring the power cables Connecting the power cable to the power supply moduleRemoving a DC power supply Connecting the dc power cablesInstalling a DC Power Supply Module Removing and installing a dc power supply modulePower Supply Module Failures Troubleshooting a DC power supplyControl panel Technical specificationsRemoving the control panel Backplane Installing the control panelRemoving the backplane Removing and installing the EMM or power supply cage Installing the backplane Removing and installing the backplaneTroubleshooting external connections Troubleshooting loss of communicationTroubleshooting power supply unit or cooling fan module Troubleshooting enclosure cooling problems Troubleshooting Enclosure Management Modules Troubleshooting hard disk drivesTroubleshooting a wet enclosure Troubleshooting enclosure connectionsTroubleshooting a damaged enclosure Page Contacting Dell Documentation feedback
Related manuals
Manual 7 pages 48.26 Kb

MD1400 specifications

The Dell MD1400 is a robust and versatile storage solution designed to meet the demands of modern data-intensive environments. It is particularly well-suited for organizations requiring high-performance storage that seamlessly integrates with existing infrastructures. The MD1400 features a compact 2U form factor, which allows for efficient use of rack space while ensuring ample storage capabilities.

One of the standout features of the MD1400 is its impressive scalability. Supporting up to 84 drives in a single rack, the system can accommodate a variety of drive types, including traditional spinning disks (HDDs) and solid-state drives (SSDs), enabling users to optimize performance based on their specific needs. The system is built to support both SAS and SATA interfaces, providing flexibility in drive selection and deployment.

The Dell MD1400 also incorporates advanced RAID technology, enabling users to implement data protection strategies that align with their organizational policies. With support for multiple RAID levels, including RAID 0, 1, 5, 6, 10, and 50, organizations can choose the optimal configuration to balance performance and data redundancy. This versatility ensures that mission-critical applications remain robust and can recover rapidly from hardware failures.

In terms of connectivity, the MD1400 utilizes dual controllers with redundant power supplies, ensuring high availability and minimal downtime. The dual-controller architecture allows for load balancing across multiple paths, which not only enhances performance but also ensures that data remains accessible even in the event of a controller failure.

The management of the MD1400 is another strong point, featuring an intuitive graphical user interface that simplifies storage configuration, monitoring, and maintenance tasks. The system supports various management protocols, providing seamless integration with existing IT ecosystems and making it easier for administrators to manage their storage resources effectively.

Additionally, the Dell MD1400 is designed with energy efficiency in mind. With options for low-power drives and efficient cooling mechanisms, organizations can reduce their total cost of ownership while contributing to sustainability initiatives.

In summary, the Dell MD1400 is a powerful storage solution that offers scalability, performance, and advanced data protection features. Its dual-controller architecture, flexible drive options, and user-friendly management make it an excellent choice for businesses looking to enhance their storage capabilities while ensuring data integrity and availability. Investing in the MD1400 allows organizations to stay ahead in an ever-evolving digital landscape.