Chauvet manual CBB-6 Instructions, Basic Assembly, Advanced Assembly Options

CBB-6 Instructions

The CBB-6 works with the COLORband PiX™ Mini (shown below), COLORband PiX™, and most linear/strip lights.

Basic Assembly

To assemble the CBB-6 bracket:

1.Unscrew the bracket adjustment knob on the light you wish to attach to the bracket.

2.Align the light to any of the small mounting holes on the CBB-6 (maximum 6 lights).

3.Reattach the bracket adjustment knob to the light.

4.Repeat up to a total of six times with a pair of CBB-6 brackets.

The final assembly should appear similar to this:

Advanced Assembly Options

The CBB-6 is fully stackable. Use the included screws to attach another CBB-6 to the top of the bracket for additional rows of lights.

Do NOT connect more than two CBB-6 brackets vertically (for a maximum of 12 strip lights).

Before mounting the CBB-6 onto any structure, ensure that the structure onto which you are mounting the product on can support the total weight.

When rigging the product onto truss, you should use a mounting clamp with the appropriate weight capacity. The CBB-6 bracket has multiple 13 mm holes which are appropriate for this purpose.

CHAUVET® recommends the CLP-15 heavy-duty clamp (sold separately).