Chief Manufacturing JWP-V installation instructions Secure Wall Bracket

Page 7

Installation Instructions

JWP-V

SECURE WALL BRACKET

WARNING: It is the responsibility of the installer to verify that the surface to which the mount is anchored will safely support the combined load of all attached components and equipment.

Install wall bracket as follows:

1.Determine exact mounting location prior to installation, considering unit’s swing arm and extension radius.

2.Using wall bracket (30) as a template, mark two pilot holes. (See Figure 1)

3.Drill two ¼” pilot holes a minimum depth of 2” into wood stud.

NOTE: Make sure wall bracket is level before installing lag bolts.

4.Using a 9/16” socket wrench, install two lag bolts (40) to wall. Do not over-tighten the lag bolts.

IMPORTANT: Over-tightening lag bolts may cause bracket to compress into soft wall surface, resulting in difficult mount installation or improper engaging of set screw (Ref. “Attach Mount to Wall Bracket,” page 13, step 2). If this occurs, remove bracket, install 3/8” steel washers as required between bracket and wall surface, and reinstall bracket.

INSTALLATION

100mm x 100mm Flush and Recessed Mount Installation

Flush Mount Installation

To flush mount Centris Bracket:

1.Start two M4 x 12mm screws (60) into top mounting holes (not shown) on display.

2.Align mounting holes on Centris Bracket with screws installed on display. Hang display on Centris Bracket (see Figure 2).

3.Install two remaining M4 x 12mm screws (60) into bottom mounting holes on display.

4.Tighten four M4 x 12mm screws (60) screws.

5.Proceed to “Attach Mount to Wall Bracket” section of this manual.

Pilot Holes

30

40

Figure 1. Secure Wall Bracket

60

Centris Bracket

Figure 2. Flush Mount Centris Bracket to Display

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Installation I N S T R U C T I O N S Important Warnings and Cautions Dimensional DrawingSpecifications ContentsTools Required for Installation Inspect Unit Before InstallingIntroduction Typical Vesa Mounting Hole ConfigurationsJWP-V Components PartsParts JWP Parts ListSecure Wall Bracket Secure Wall BracketRecess Mount Centris Bracket to Display Recess Mount InstallationAttaching Interface Bracket to Display Interface Bracket InstallationFor the 300mm x 100mm hole pattern, do the following 200mm x 100mm Pattern300mm x 100mm Pattern For the 200mm x 100mm hole pattern, do the followingFor the 400mm x 200mm hole pattern, do the following 300mm x 200mm Pattern400mm x 200mm Pattern For the 300mm x 200mm hole pattern, do the followingFor the 200mm x 200mm hole pattern, do the following 200mm x 200mm PatternAttach Mount to Wall Bracket Attach Display to Mount Centris BracketCable Management AdjustmentsLateral Tension Adjustment Pitch Tension Adjustment

JWP-V specifications

Chief Manufacturing, a leader in the realm of display mounting solutions, has made significant strides with their innovative product, the JWP-V. This versatile wall mount is designed to accommodate a range of professional needs, primarily focusing on large format displays. The JWP-V stands out due to its robust construction and thoughtful engineering, making it an ideal choice for commercial settings, classrooms, and conference rooms.

One of the key features of the JWP-V is its exceptional weight capacity. Designed to support displays up to 200 pounds, it ensures that even the largest screens are securely mounted. This capability is further enhanced by its sturdy materials which are rigorously tested for durability and stability. The mount’s design incorporates a universal mounting pattern that allows for compatibility with various display brands and models, offering users flexibility in their screen choices.

The installation process of the JWP-V is remarkably user-friendly, featuring a simple 3-step installation procedure. The mount includes built-in leveling adjustments that make it easier to achieve a perfect alignment even after installation. Chief’s innovative Rail System technology allows users to slide the display horizontally once mounted, facilitating access to connections or allowing for minor adjustments without needing to remove the display.

Another notable characteristic of the JWP-V is its cable management system. It provides an organized way to conceal cables, minimizing clutter and creating a clean, professional look. This feature is particularly beneficial in environments where aesthetics are paramount, such as corporate offices or educational institutions.

The JWP-V also embraces technological advancements with its integrated security features. It includes locking mechanisms that safeguard the display against theft or accidental dislodging, providing peace of mind for users in busy environments.

In summary, Chief Manufacturing's JWP-V wall mount is engineered to provide safety, flexibility, and ease of use, making it a top choice in the display mounting industry. Its combination of robust construction, intelligent design, and compatibility with various devices positions it as a leading solution for professionals seeking reliable and efficient mounting options for their displays.
Top Page Image Contents