Chief Manufacturing LVS1U / LVSXU manual Service, Extending and Retracting Mount

Page 16

LVS1U / LVSXU

Installation Instructions

SERVICE

Extending and Retracting Mount

The mounts may be extended and retracted only in a service situation.

1.To Extend Mount: Pull on the RapidDraw release cord designated for the specific mount.

2.When the mount releases, carefully grasp bezel edges of display and pull out slowly, being careful to clear surrounding displays.

3.To Retract Mount: Carefully push against display bezel edges, being careful to clear surrounding displays.

4.Push display against mount until it clicks into place.

Interface Bracket Kickstands

The interface brackets are equipped with kickstands which must only be used in a service situation.

1.Pull down on interface bracket release cords. (See Figure 22)

2.Pull out bottom of display.

3.Flip down the kickstands on both interface brackets, and prop against mount during service.

2	Kickstand
2
1
Interface bracket	3
release cords
(Display not shown)

Figure 22

4.After service, hold display while flipping up both kickstands.

5.Slowly bring bottom of display in towards mount until it clicks into place.

RapidDraw Display Release

The RapidDraw pull cord and display release allows easy service access to any specific display in the video wall.

Each mount ships with the pull cord installed. It is installed so that when pulled from below the mount or from the right of the mount it will release the display for service.

The following steps should be taken if an installation requires that the pull cord be accessible from the left of the display or above the display:

1.Unhook the pull cord from the mount. (See Figure 23)

2.Reinstall the pull cord in the opposite hole on the mount. (See Figure 23)

Mount ships with

To release display from

cord attached here

2 left or above,

reinstall cord

here

Figure 23

16

Image 16

Contents LVS1U / Lvsxu Important Safety Instructions DisclaimerTable of Contents By Hand Optional Dimensions LVS1U Tools Required for Installation PartsInstallation Instructions LET’S GET STARTED! Measurements You’ll NeedStrut Channel Requirements Lvsxu Mounting Pattern Offset CalculationAttaching Strut Channel or Rail Important ! Reference measurements noted onPreparing Strut Channel Lvsxu only Hanging LVS1U/LVSXU Mount on RailHanging Mounts Installing Interface Brackets Adding Displays to MountsAdjustments LVS1U / Lvsxu Completing the Installation Fastener Installation MethodsPlywood-Backed Steel Stud FrontService Extending and Retracting MountInterface Bracket Kickstands RapidDraw Display ReleaseLVS1U / Lvsxu LVS1U / Lvsxu LVS1U / Lvsxu USA/International

LVS1U / LVSXU specifications

The Chief Manufacturing LVS1U and LVSXU are state-of-the-art mounting solutions designed for the seamless integration of large displays in various environments, from corporate offices to educational settings and retail spaces. These models are particularly tailored for flat panel displays, providing enhanced functionality, flexibility, and reliability that meet the needs of modern technology.

One of the standout features of the LVS1U and LVSXU is their ability to support a wide range of display sizes, typically accommodating screens from 32 inches up to 75 inches. This versatility makes them suitable for a variety of applications, including video conferencing, digital signage, and collaborative workspaces. The mounting solutions are engineered to provide a secure hold, ensuring that the display remains stable even in high-traffic areas.

These models incorporate advanced technologies that enhance the user experience. For example, the LVS1U features a convenient tilting mechanism that allows for easy adjustments to the display angle. This feature is particularly beneficial in environments where glare from overhead lighting can affect visibility. The LVSXU variant takes it a step further by offering additional pivot capabilities, which provide even more flexibility in positioning the screen for optimal viewing.

Durability and ease of installation are key characteristics of the LVS1U and LVSXU. Made from high-quality materials, these mountings are designed to withstand the rigors of everyday use. The installation process is straightforward, thanks to integrated cable management systems and adjustable mounting brackets that simplify setup while maintaining a clean appearance. These mountings can be either wall-mounted or placed on a mobile cart, offering further versatility based on the specific layout and spatial requirements of the environment.

Another significant aspect is their compatibility with various VESA patterns, making the LVS1U and LVSXU suitable for a broad spectrum of display models. This adaptability ensures that users can easily upgrade their displays without the need for additional mounting hardware.

In summary, the Chief Manufacturing LVS1U and LVSXU are exceptional solutions for mounting large displays, combining innovative features, advanced technologies, and robust design. Their flexibility, durability, and ease of use make them ideal for modern commercial and educational settings, leading to improved engagement and enhanced viewing experiences.