Omnimount NC200C, 1004114 manual ¡ADVERTENCIA! Español

Page 2

WARNING! – ENGLISH

ƒWARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS BEFORE BEGINNING.

ƒIf you do not understand the instructions or have any concerns or questions, please contact a qualified installer. North America residents can contact OmniMount customer service at 800.668.6848 or info@omnimount.com.

ƒDo not install or assemble if the product or hardware is damaged or missing. If you require replacement parts, contact OmniMount Customer Service at 800.668.6848 or Info@omnimount.com. International customers need to contact a local distributor for assistance.

ƒFor wall mounted products: This product has been designed for use on a vertical wall constructed of wood studs or solid concrete. Wood studs being defined as a wall consisting of a minimum of 2” x 4” studs with a maximum of 24” stud spacing and a minimum of 16” stud spacing with a maximum of ½” inch of wall covering (drywall, lath, plaster). For custom installations please contact a qualified installer. For safe installation, the wall you are mounting to must support 4 times the weight of the total load. If not, the surface must be reinforced to meet this standard. The installer is responsible for verifying that the wall structure/surface and the anchors used in the installation will safely support the total load. Do not use this product for any application other than those specified by OmniMount.

ƒThis product is not designed to support the load of a CRT Television

ƒThis product may contain moving parts. Use with caution.

ƒDO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT.

¡ADVERTENCIA! – ESPAÑOL

ƒ¡ADVERTENCIA! LA INSTALACIÓN O EL MONTAJE INAPROPIADOS PUEDEN PROVOCAR LESIONES, DAÑOS MATERIALES O INCLUSO LA MUERTE. ANTES DE COMENZAR, LEA LAS SIGUIENTES ADVERTENCIAS.

ƒSi las instrucciones no le resultan claras o si tiene alguna duda o pregunta, comuníquese con un instalador calificado. Los residentes de América del Norte pueden comunicarse con el servicio de Atención al cliente de OmniMount al 800.668.6848 o por escrito a info@omnimount.com.

ƒSi el producto o el hardware está dañado o no se le envió alguna pieza, no realice la instalación ni el montaje. Si necesita piezas de repuesto, comuníquese con el servicio de Atención al cliente de OmniMount al 800.668.6848 o por escrito a info@omnimount.com. Los clientes internacionales deberán comunicarse con un distribuidor local para recibir asistencia.

ƒInformación acerca de los productos que se instalan en la pared: Este producto está diseñado para ser instalado en paredes verticales con paneles de madera u hormigón. Se define a los paneles verticales como una pared que consiste de un mínimo de paneles de 5 x 10 cm con un espacio entre paneles máximo de 60 cm y un espacio mínimo entre paneles de 41 cm, con un máximo de cobertura de pared (hoja de yeso, listón, yeso) de 13 mm. Para instalaciones a medida contacte a un instalador calificado. Para realizar una instalación segura, la pared elegida debe ser capaz de soportar 4 veces el peso de la carga total. De lo contrario, deberá reforzar la superficie para que cumpla con este requisito. El instalador es el responsable de comprobar que la estructura/superficie de la pared y los tacos que se utilizan en la instalación soporten la carga total de manera segura.

ƒEste producto no está diseñado para soportar la carga de un televisor CTR. Ce produit n’est pas conçu pour supporter le poids d’un téléviseur à écran cathodique ou à écran plat.No utilice este producto para ninguna aplicación que OmniMount no haya especificado.

ƒEste producto puede contener componentes móviles. Úselo con precaución.

ƒNO EXCEDA LA CAPACIDAD DE PESO MÁXIMA PARA ESTE PRODUCTO.

AVERTISSEMENT! – FRANÇAIS

ƒAVERTISSEMENT! SI CE PRODUIT N’EST PAS CORRECTEMENT INSTALLÉ OU ASSEMBLÉ, IL RISQUE DE CAUSER DES BLESSURES GRAVES, VOIRE MORTELLES, AINSI QUE DES DOMMAGES MATÉRIELS IMPORTANTS. AVANT DE COMMENCER, LISEZ LES AVERTISSEMENTS SUIVANTS.

ƒSi vous ne comprenez pas les instructions, de même que si vous avez un doute ou des questions, veuillez contacter un installateur qualifié. Les personnes qui résident en Amérique du Nord peuvent contacter le service à la clientèle OmniMount au 800.668.6848 ou à info@omnimount.com.

ƒSi vous découvrez que le produit est endommagé ou que des fixations sont manquantes ou endommagées, n’installez pas le produit. Si vous avez besoin de pièces de rechange, contactez le service à la clientèle OmniMount au 800.668.6848 ou à info@omnimount.com. Les clients habitant hors de l’Amérique du Nord peuvent obtenir de l’aide auprès de leur distributeur local.

ƒProduits s’installant au mur : Ce produit a été conçu pour une installation sur un mur vertical de béton massif ou construit sur une charpente en bois. Une charpente en bois est une structure murale constituée avec des pièces de colombage d’une épaisseur d’au moins 5 cm x 10 cm ayant un espacement de 41 cm à 60 cm et étant recouverte d’un revêtement d’une épaisseur d’au moins 13 mm (cloison sèche, lattes, plâtre). Veuillez contacter un installateur qualifié pour les installations spéciales. Pour que l'installation soit sécuritaire, le mur d'installation doit pouvoir supporter 4 fois le poids de la charge appliquée. Si tel n'est pas le cas, la surface doit être renforcée en conséquence. L'installateur doit s'assurer que la structure/surface du mur d'installation et les chevilles d'ancrage utilisées peuvent supporter sans danger le poids de tous les équipements.

ƒCe produit n’est pas conçu pour supporter le poids d’un téléviseur à écran cathodique ou à écran plat.Este producto no está diseñado para soportar la carga de un televisor CTR.

ƒCe produit ne doit pas être utilisé pour un usage autre que ceux spécifiés par OmniMount.

ƒCe produit peut contenir des pièces mobiles. Veuillez l'utiliser avec prudence.P2ƒ NE DÉPASSEZ JAMAIS LA CAPACITÉ DE CHARGE MAXIMALE DE CE PRODUIT.

Image 2
Contents PN # Images may differ from actual product¡ADVERTENCIA! Español WARNUNG! Deutsch FIGYELEM! Magyar AVERTISMENT! Română ﺞﺘﻨﻤﻟﺎﺑ صﺎﺨﻟا نزﻮﻠﻟ ﻰﺼﻗﻷا ﺪﺤﻟا زوﺎﺠﺘﺗ ﻻ ΠΡΟΕΙΔΟΠΟΙΗΣΗ! ΕλληνικaWeight Capacity Maximum Screen SizeSymbol KEY 水平 调整 水平器 ハンマー オプションRemove Tighten Fastener Loosen Fastener Hand tighten Tools Needed Monitor Kit L-U-vBContents Step Wood Stud Installation Find studs and mark edge and center locationsUse wall plate or wall template to mark mounting locations Wood Stud Wall Installation Drill pilot holeConcrete Installation Solid Concrete Only Do Not Drill Into MortarConcrete Pilot Solid ConcreteWood Stud Installation Concrete Installation 壁掛け BracketMounting Option a Mounting Option C Mounting Option BBe Sure to Center Adapter on T.V P22 Not Included Spacers Attach monitor using monitor hardware, M-A, M-B, etc… Hang with monitor attached P27 Cable Management Route CablesAdjust Tilt Adjust to Desired Location or TiltOmnimount Product Warranty EnglishP31 OmniMount Systems, Inc

1004114, NC200C specifications

The Omnimount 1004114, also known as the NC200C, is an advanced wall mount bracket designed specifically for flat-screen televisions and various display applications. Aimed at both home users and commercial environments, this mount offers a wealth of features and technologies that enhance the viewing experience while ensuring safety and stability.

One of the standout characteristics of the 1004114 model is its tilt and swivel functionality. This allows users to adjust the angle of their TV for optimal viewing, minimizing glare from windows or lights, and providing flexibility in room layout. The mount can support a wide range of TV sizes, generally from 32 to 60 inches, making it a versatile option for many households and businesses.

The construction of the Omnimount NC200C utilizes high-quality materials that guarantee durability and longevity. The bracket is engineered to hold up to 100 pounds, ensuring that even the heaviest flat-screen TVs can be securely mounted. The robust build, combined with a sleek design, means it can enhance the aesthetics of any room while securely holding the television in place.

Installation is straightforward thanks to the included hardware and the clear instructions provided. The mount features a universal design that is compatible with most VESA standards, making it easy to find the right fit for your television. The adjustable arms also allow for fine-tuning during installation, accommodating different wall configurations and ensuring that the mount is level and secure.

Another key feature of the NC200C is cable management. The design includes provisions for organizing cables, which helps to prevent clutter and keeps the installation looking clean and professional. This is particularly important in commercial settings where a neat appearance is paramount.

Safety is also a priority with the Omnimount 1004114. The design includes safety features that prevent accidental dismounts and ensure that the television remains securely attached to the wall. The mount’s stability and reinforced joints further enhance its reliability, giving users peace of mind.

In summary, the Omnimount 1004114, NC200C is a well-engineered wall mount that seamlessly combines functionality, safety, and design. With its robust construction, adjustable features, and thoughtful cable management, it is an excellent choice for anyone looking to enhance their television setup. Whether for home entertainment or professional display, this mount stands out as a reliable solution for modern viewing needs.