Instructions, SBX-2BH SBX-2BV, Installation

- INSTRUCTIONS -

The SBX-2BH is a surface mount stainless steel enclosure designed for mounting two Aiphone 2-gang devices horizontally. The SBX-2BV is a similar box used to mount the devices vertically. The enclosures are weather resistant and include space for wiring inside. These boxes are designed for an intercom sub station and HID-SS ProxPoint® Plus card reader to be mounted together in a uniform housing for a more professional and aesthetically pleasing look.

				SBX-2BH
			"
		6
	1
	/							"
5								"
-							8
3							/
						3
						-
						3
				9
				-
					5
					/
						8
						"

SBX-2BV

4
-
	1
	1
		/
			1
			6
				"

Mounting Ears

		"
	8
	/
3
-
2

4-13/16"

Mounting

Ears

9-5/8"

		"
	8
	/
3
-
2

INSTALLATION:

1.Mount SBX-2BH(V) to wall surface, or on two 1-gang boxes or rings spaced apart by 4-¾”, center-to-center.

2.Connect supplied speed nuts to mounting ears (8 total).

3.Make wiring connections to devices to be installed in the box.

4.Mount devices to box using screws provided.

5.Remove protective plastic film from the unit.

SAMPLE:

HID-SS and LE-SS mounted in SBX-2BH

NOTE: These are not 4-gang surface mount enclosures, but are
enclosures for two separate 2-gang units. The intended use is for
mounting an intercom sub station and a card reader in the same
uniform housing.	Page 1