WOODS 1006 LOADER
Install Hydraulic Fittings
Use thread sealant on pipe threads. Be careful not to use excess sealant that could enter hydraulic system.
NOTE: Some fittings in hose kit will not be used for this installation.
1.Remove male quick coupler (C) and elbow (B) from the PBY port (N) on the hydraulic manifold. See Figure 8.
2.Attach tee (5) to adapter (A) and point it to the rear. See Figure 9.
3.Attach adapter (14) and male quick coupler (3) to the center portion tee (5).
4.Attach elbow (B) and male quick coupler (C) to the end of tee (5). Point elbow and quick coupler to the front.
5.Attach female quick coupler (2) to the end of the loader valve PBY hose.
Loader Fittings
A.315045 Adapter, 3/8 BSPTM x 3/8 NPTM
B.313010 Elbow, 3/8 NPTM x 3/8 NPTM
C.
Hose KIt Fitting
5.66368 Tee, 3/8 NPT
RETURN
PRESSURE
PBY
A
C
B |
Figure 8. 1006 Loader Hydraulic Fitting
|
| Loader Valve | |
|
| PBY Hose | |
T | P | 2 | |
N | A | ||
| |||
| 5 | C | |
|
| ||
14 |
|
| |
3 |
|
| |
| B | ||
|
|
3. 64300 Quick coupler, male 3/8 | Figure 9. Hydraulic Fitting INstallation |
14.315030 Adapter, 3/8 NPTM x 3/8 NPTM
Backhoe Hose Connection
1.Attach hose (1) with female quick coupler (2) from the backhoe valve OUT port to the male quick coupler in the center of tee (5).
2.Attach hose (1) with male quick coupler (3) from the backhoe valve to female quick coupler (2) on the end of the loader valve PBY hose.
1.38656 Hose, 112" x 3/8 NPTM x 3/4 ORBM
2.64299 Quick coupler, female
3.64300 Quick coupler, male
5.66368 Tee, 3/8 NPT
| T |
|
|
| P |
|
|
|
|
| 5 |
| N |
|
|
2 |
|
|
|
1 | Male |
| 2 |
|
| 3 | Loader Valve |
|
|
| |
Backhoe Valve |
|
| PBY Hose |
|
|
| |
OUT Port | Backhoe Valve | 1 |
|
|
|
| |
IN Port |
|
|
Figure 10. Backhoe Hose Connection
10 Installation | MAN0131 (Rev. 12/23/2005) |
|
|