Xantech SPLCD, mrc88, MRC44, XTR39 manual Default Template Project, Start

- DEFAULT TEMPLATE PROJECT -

Another programming option is to select a template project. The template project is already populated with graphics applicable to most needs. Minor edits can also be done.

Each source will need IR or RS232 commands programmed to each button. For more information on how to do this, visit the XTR39 Instruction Manual. Or visit Auto-Fill in the section below

Start

With Dragon 2.1 up and running on your computer, go to the top-left of the screen and select “File” and then “New project”. A new screen will appear.

Select “Default Project” and press “OK” to continue.

STEP 1

The “Default Projects” start-up screen will appear.

Select the project you wish to use and press “OK” to continue.

- 7 -