Placement, Sensitivity Adjustment | Xantech 48195D specification

PLACEMENT

The IR receiver should be located so that it is not directly facing a light source such as lamps or displays (standard, LCD, and Plasma). When mounted near a display, it should be flush to the display and away from light reflections that may occur.

SENSITIVITY ADJUSTMENT

Located on the bottom side of the IR receiver, the sensitivity adjustment allows fine adjustment of the reception range and performance in various environments. For example, if there is too much light interference affecting the performance of the IR receiver, the sensitivity can be decreased. Also, if the talk-back LED is constantly lit, sensitivity needs to be decreased until proper remote operation is achieved.

Clockwise – Increase Sensitivity

Counter-Clockwise – Decrease Sensitivity

Limited Warranty

Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at Xantech’s option, at no charge. Xantech will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state to state.

Xantech Corporation

13100 Telfair Ave., Sylmar CA 91342 Xantech.com

Document # 08905255A

This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.

48195D specifications

The Xantech 48195D is an advanced solution designed for a seamless integration of audio and video systems. This device is popular among professional installers and enthusiasts alike due to its innovative features and robust performance. The 48195D is primarily known for its capabilities in managing and distributing AV signals effectively, making it essential for both residential and commercial installations.

One of the standout features of the Xantech 48195D is its versatile input/output capacity. It supports various audio and video formats, enabling the connection of multiple devices simultaneously. This flexibility makes it easy to integrate with existing systems, whether for home theater setups or corporate AV solutions. Moreover, the 48195D supports Ethernet over Coax technology, allowing for long-distance transmission of signals without degrading quality, which is essential in larger setups where equipment may be spread out over significant distances.

In terms of technologies, the Xantech 48195D boasts advanced signal processing capabilities. It features built-in scaling capabilities that allow users to adjust the resolution of their output to match different display devices. This ensures optimal performance and picture quality, regardless of the source material or display type. Additionally, the device includes support for HDCP (High-bandwidth Digital Content Protection), which is a critical requirement for playing protected content, ensuring users can access a broader range of media without interruptions.

Another notable characteristic of the Xantech 48195D is its user-friendly interface. The device comes equipped with an intuitive control panel that simplifies navigation and configuration, making it accessible even for those who may not have extensive technical expertise. Coupled with various control options, including IR and serial control, the 48195D can be seamlessly integrated into existing setups, which is a huge advantage for installers and users alike.

Overall, the Xantech 48195D is a feature-rich device designed to enhance audio and video distribution in various settings. With its advanced technologies, flexible connectivity options, and user-centric design, it stands out as a reliable choice for anyone looking to elevate their AV experience. Whether in a home theater environment or in a professional space, the Xantech 48195D is engineered to meet diverse needs, delivering high-quality performance and adaptability.