MAINAI MENUEN
2. Installation
1. Press | PR+, PR- keys to move the cursor up or down. | |
2. Press | EXIT key or | key to move the focus to the |
left menu. |
| |
2.1 Auto Scan
When you enter Auto Scan menu, the screen will display as below.
In FT A Only, press [Left/Right] key to choose Yes or No.
Move the highlight on the search option, and press [OK] key to start scanning.
Press [EXIT] key to exit this menu.
2.2 Channel Scan
When you enter Channel Scan , the screen will display as beside.
There are two scan modes for you. Y ou can choose to scan by channel or by frequency .
When scan band is UHF and region is “China ”, the range of Ch Number is from 13 to 61. When scan band is VHF and region is “China ”, the range of Ch Number is from 1 to 12. (It ’ s according to region.)
When you complete your conguration, move highlight to search option, and press [OK] key to start scanning.
Press [EXIT] key to exit the scanning and save the current parameters.
2.3 Aerial Adjustment
When you enter Antenna feeding, the screen will display as beside.
In CH No. submenu, press [Left/Right] key to choose the channel.
In Tuner Power submenu, press [Left/Right] key to choose O and On.
2.4 LCN
Press [Left/Right] key to choose On and O.
11